OUTDOOR OPTICAL NETWORK TERMINAL ENCLOSURE Houses the components of a typical FTTH installation. Designed to mount to a wall, or directly on optional slack storage enclosure which accommodates up to 75 feet of fiber. 11.80” x 13.26” x 2.73” 13.50” x 11.56” x 3.37” Private labeling available for all enclosures OD-ONT-SSENC shown with OSP drop cable, Hardened Fiber Connector to SC Adapter and FP-01-01-01 Fiber Adapter Plate (not included) OD-ONT-ENC Outdoor Optical Network Terminal Enclosure OD-ONT-SSENC Outdoor Optical Network Terminal Slack Storage Enclosure – no cover OD-ONT-SSC Cover for OD-ONT-SSENC Optional Cover - OD-ONT-SSC FIBER ADAPTER PLATE SERIES The FP01, FP02 & FP04 Series are single, 6 port and 12 port fiber adapter plates that attach into Tii’s 169F, 171F, 506F, 507F, 508F, 509F and OD-ONT-ENC Series Fiber Enclosures. The fiber plate functions as a patch point for the incoming fiber drop and distribution out to the customer. FP XX -XX -XX Series Adapter Type Number of Ports 01 = Single Port 02 = 6 Port 04 = 12 Port 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 02 = 2 04 = 4 06 = 6 (FP02 series only) 12 = 12 (FP04 series SC only) 12 = 24 (FP04 series LC only) FP01 Dimensions: 4.23” x 3.60” x 1.50” FP02 Dimensions: 2.01” x 3.58” x 1.71” FP04 Dimensions: 2.42” x 3.63” x 2.01” FP01 FP02 ACCESSORIES 506F-GRM-KIT Grommets for 506F Standard Grommet (2 ea.) 506F-CMP-GRM-KIT Grommets for 506F 1/2” Compression Entry (2 ea.) 506F-CON-GRM-KIT1/2 Grommets for 506F 1/2” Conduit Entry (2 ea.) 506F-CON-GRM-KIT3/4 Grommets for 506F 3/4” Conduit Entry (2 ea.) FP2G-06RSAN00* 6 Port Patch & Splice Base SC/APC Adapters used in 506F Series Enclosures FP2R-K9-01-01-100-1 Fiber Spooling System with 100’ of Flat Bend Insensitive MicroDrop Cable for use with 506F FP2R-K9-01-01-100-01 FP2G-06RSAN00 *Please contact customer service for additional port count configurations
RkJQdWJsaXNoZXIy MTM4MzQ3Mw==