Fiber To The Home Ordering Guide

www.tiitech.com 506F -XX -XX -XX -X X SERIES ADAPTER TYPE NO. OF PORTS CONFIG. OPTIONS GROMMETS (OPTIONAL) 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 04 = 4 06 = 6 12 = 12 24 = 24 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed Blank=2Standard Grommets C=2Conduit Grommets G=1Standard Grommet, 1ConduitGrommet Up to 12 fibers, up to 50’ slack storage, indoor or outdoor 169F XX XX ADAPTER TYPE NO. OF PORTS 01 = SC-APC 02 = SC-UPC 01 = 1 02 = 2 03 = 4 06 = 6 Up to 4 fibers, indoor or outdoor 508F -XX -XX -XX -X SERIES ADAPTER TYPE NO. OF ADAPTERS CONFIGURATION OPTIONS 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 03 = 1.5” Fiber Storage Tray 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 03 = 3 04 = 4 06 = 6 12 = 12 N = None C = Cable Entry Clamp E = External Ground D = External Ground & Cable Entry Clamp Installed Designed for rigid drop fiber installations with up to 3 inch bend radius 171F -XX X XX SERIES MIDDLE PLATE GRD STUD 00 = No FP Plate, No Adapters 01 = FP Plate, No Adapters U1 = One SC UPC Adapter on FP Plate A2 = Two SC APC Adapter on FP Plate U2 = Two SC UPC Adapter on FP Plate A1 = One SC APC Adapter on FP Plate 0 = None 1 = Middle Plate 0 = None 1 = Ground Stud Terminates Up to Two Single-Fiber Cables (Four with LC) Optional Copper Connectivity Interface for Small Cells, DAS, or G.fast OUTDOOR FIBER INTERFACE DEVICES/SLACK STORAGE UNITS Fiber Interface Device/Slack Storage Transition Enclosures provide a point of connection between the OSP fiber drop and customer fiber drop. Tii Transition Enclosures are offered in a variety of sizes to meet your installation and placement requirements. Available with slack storage and accommodations for up to 16 fiber terminations. 506R -XX -XX -XX -XXX -X X -XX CABLE TYPE ADAPTER TYPE ADAPTER QTY. LENGTH IN FT CONFIG. OPTIONS GROMMETS (OPTIONAL) OPTIONAL PRE-PEEL K9 = MicroDrop 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 025 050 075 100 125 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed Blank=2 Standard Grommets C=2Conduit Grommets G=1Standard Grommet, 1Conduit Grommet Blank =No Pre-Peel,NoPullSock PE = No Pre-Peel, with Pull Sock 01=¼”ofPeel Exposed with No Pull Sock 02=¼”ofPeel ExposedwithPullSock Reeled dispenser loaded with customer distribution fiber allows for fast deployment For Inside Transitions For Outdoor Tra itions 6.11”x 4.33”x 2.15” 6.67”x 6.56”x 2.87” 10.26”x 9.94”x 2.91” 10.26”x 9.94”x 2.91” 12.54”x 8.39”x 3.19”