FIBER INTERFACE DEVICES / SLACK STORAGE TERMINALS 10 www.tiitech.com 171F -XX -X -XX -X -X **ADAPTER MOUNTING OPTIONS MIDDLE PLATE FOR POWER CONNECTIONS GROUND STUD SPLIT RATIO SPLITTER QTY. 00 = No FP Plate, No Adapters 01 = FP Plate, No Adapters U1 = One SC UPC Adapters on FP01 Plate U2 = Two SC UPC Adapters on FP01 Plate A1 = One SC APC Adapters on FP01 Plate A2 = Two SC APC Adapters on FP01 Plate 0 = None 1 = Middle Plate 0 = None 1 = Ground Stud 0 = None 1 = 1x8 4 = 1x4 0-2 Dimensions (height x width x depth): 6.67” x 6.56” x 2.87” (16.94 cm x 16.66 cm x 7.29 cm) NEMA-4 rated. Terminates up to two single-fiber cables (four with LC). Optional copper connectivity interface for Small Cells, DAS, or G.fast **Please contact customer service for LC model number FIBER INTERFACE DEVICES/PATCH ‘N’ SLACK STORAGE UNITS Fiber Interface Device/Patch ‘N’ Slack Storage Units are compact units which features connectivity between fiber drop and customer fiber drop, as well as slack storage. Enclosures are available in a variety of sizes to accommodate up to 12 fiber terminations and installation locations. FIBER ADAPTER PLATE SERIES The FP01, FP02 & FP04 Series are single, 6 port and 12 port fiber adapter plates that attach into Tii’s 169F, 171F, 506F, 507F, 508F, 509F and OD-ONT-ENC Series Fiber Enclosures. The fiber plate functions as a patch point for the incoming fiber drop and distribution out to the customer. 169F -XX -XX ADAPTER TYPE NO. OF PORTS 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 02 = 2 03 = 4 Dimensions (height x width x depth): 6.11” x 4.33” x 2.15” (15.5 cm x 11.0 cm x 5.5 cm) Up to 4 fibers, indoor or outdoor FP XX -XX -XX Series Adapter Type Number of Ports 01 = Single Port 02 = 6 Port 04 = 12 Port 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 02 = 2 04 = 4 06 = 6 (FP02 series only) 12 = 12 (FP04 series SC only) 12 = 24 (FP04 series LC only) FP01 Dimensions (height x width x depth): 4.23” x 3.60” x 1.50” (10.74 cm x 9.14 cm x 3.81 cm) FP02 Dimensions (height x width x depth): 2.01” x 3.58” x 1.71” (5.11 cm x 9.09 cm x 4.34 cm) FP04 Dimensions (height x width x depth): 2.42” x 3.63” x 2.01” (6.15 cm x 9.22 cm x 5.11 cm) ACCESSORIES 506F-GRM-KIT Grommets for 506F Standard Grommet (2 ea.) 506F-CMP-GRM-KIT Grommets for 506F 1/2” Compression Entry (2 ea.) 506F-CON-GRM-KIT1/2 Grommets for 506F 1/2” Conduit Entry (2 ea.) 506F-CON-GRM-KIT3/4 Grommets for 506F 3/4” Conduit Entry (2 ea.) FP2G-06RSAN00* 6 Port Patch & Splice Base SC/APC Adapters used in 506F Series Enclosures FP2R-K9-01-01-100-1 Fiber Spooling System with 100’ of Flat Bend Insensitive MicroDrop Cable for use with 506F FP2R-K9-01-01-100-01 FP2G-06RSAN00 *Please contact customer service for additional port count configurations
RkJQdWJsaXNoZXIy MTM4MzQ3Mw==