Fiber Optic Products
Innovative Engineering Protecting Tomorrow’s Technology For over 60 years, Tii Technologies Inc. has been a frontrunner in developing and delivering innovative fiber and copper solutions to meet the rapidly changing landscape of the telecommunication industry. Our innovative designs have been credited with supporting and enhancing network needs which increase reliability while reducing overall network cost. Tii’s understanding of its customers’ network needs is a key factor in supporting its commitment to deliver high quality products to the industry.
Table of Contents Fiber Entrance Terminals (FET Series)......................................6-9 HCCP Series Enclosures...................................................................9 Fiber Splice Plates (FP01/02 Series) ..........................................10 Fiber Interface Devices/Slack Storage Units.....................10-13 Double-Door Wallmount Distribution Enclosures............... 14 Wallmount Distribution Enclosures..........................................15 Rackmount Fiber Distribution/Slack Storage Panels.....16-17 Rackmount Brackets.....................................................................17 Stubbed Housings.........................................................................17 Patch and Splice Cassettes (PSC Series) ..................................18 Adapter Plates.................................................................................19 TSL LGX Patch and Splice Enclosures........................................20 Multi-Access Modular Unit (MAMU Series).............................21 Data Center Products....................................................................22 Data Center Distribution Panels (RDC Series)........................22 Fiber Distribution Hubs & Accessories (FDH Series).......23-28 HCCH Series Enclosures................................................................29 Fiber Cross-Connect Cabinets (FD Series)...............................30 Fiber Distribution Terminals (FDT Series)................................ 31 Splitters (LPS, LPSW, PLC, FSC, FSMx).................................32-33 Peelable MicroDrop Cable...........................................................34 Fiber Pathway System...................................................................35 Riser Tube Kit (RTK Series) .....................................................35, 50 Customer Connection Point (CCP Series)......................... 36-37 Structured Wire Flush Mount Closures (FMC Series)............ 38 Wallmount Splice Enclosures (WSE Series).............................39 Slim Patch.........................................................................................39 Simplex Jumpers............................................................................40 Duplex Jumpers..............................................................................41 Custom Fiber Assemblies.......................................................42-43 Custom Patch Cords......................................................................44 MDU Drop Cables ..........................................................................44 Pigtails............................................................................................... 45 HCCB Series Enclosures................................................................46 HCCS Series Enclosures................................................................47 ONT Enclosures with Slack Storage..........................................48 NEMA 4X Rated Outdoor Cabinet.............................................49 Fiber Access Terminal (FAT Series)............................................. 50 ONT Installation Accessories ................................................50-51 Quick Termination Field Installable Connector Kit (QT)...... 51 MFST Series Aerial Terminal........................................................ 52 AT Series Aerial Terminals......................................................52-53 Fiber Splice Tray (FST)................................................................... 54 Splice Sleeves..................................................................................54 Fiber Installation Tool (FIT) ......................................................... 54 Loop Back.........................................................................................54 Attenuators...................................................................................... 55 ODTR Launch Boxes......................................................................55 IBC Ferrule Cleaners.......................................................................55
UTILITY SOLUTIONS CENTRAL OFFICE/ HEAD END NEW CONSTRUCTION CELL TOWER DISTRIBUTION POINT DISTRIBUTION POINT CROSS CONNECT DISTRIBUTION FEEDER CABLES DROPS RESIDENTIAL RESIDENTIAL DOT APART BUILD MUNICIPAL BUILDING RAILWAY/ TRANSIT DIST 4 www.tiitech.com 1 COMPLETE NETWORKING SOLUTIONS FTTx 1 1 5 1 3 3 5 2 4 5 5 7 7 5 4 5
OFFICE BUILDING TMENT DINGS TRIBUTION POINT 5 www.tiitech.com 4 4 5 3 6 3 5 5 6 6 Fiber Distribution Terminal (FDT) Fiber Interface Slack Storage (FISS) Fiber Distribution Hub Modular Pole/Pad Mount (FDH) Fiber Rackmount Series 2 1 3 4 5 6 7 Fiber Distribution Hubs (FDH) Aerial Terminals Fiber Entrance Terminals (FETs) THE 509F PRODUCT IS MADE SUBJECT TO A LICENSE FROM CORNING OPTICAL COMMUNICATIONS LLC.
FIBER ENTRANCE TERMINALS 6 www.tiitech.com FEATURES/BENEFITS: • Provides a transition point between outdoor fiber drop and customer premise fiber • Constructed of superior materials capable of withstanding harsh outdoor environments, including UV degradation, chemical exposure and extreme temperatures • Designed for fiber installations with up to 3 inch bend radius • Corner slack retention features retain OSP and customer drop fiber • Entry grommets accept up to 1 inch conduit with provision for tie wrap retention • Internal tie down features for proper strain relief of fiber cables • Hinged cover fits securely on the base to provide maximum protection against environmental conditions and intrusion of foreign matter, protecting sensitive fiber connectivity • Cover closes securely with 3/8” hex head bolt and has a provision for a security tag 505FT SERIES - 4F FIBER ENTRANCE TERMINAL/SLACK STORAGE UNIT Indoor/outdoor compact enclosure for wall and pole mounting provides a transition point between outdoor fiber drop and customer premise/MDU fiber with up to 4 fiber ports for OSP to customer fiber connections. Convenient flip down splice tray accommodates 4 splices and fiber slack. Includes external ground. NEMA-4 rated. FET1G-01RSAN Fiber Entry Terminal 1 Port Patch Panel SC-APC FET1G-01RSA9 Fiber Entry Terminal 1 Port Patch Panel SC-APC SM 900um Pigtail FET1G-02RSAN Fiber Entry Terminal 2 Port Patch Panel SC-APC FET1G-02RSA9 Fiber Entry Terminal 2 Port Patch Panel SC-APC SM 900um Pigtail Dimensions (height x width x depth): 6.11” x 4.33” x 2.15” (15.5 cm x 10.9 cm x 5.4 cm) FET1 SERIES - 4F FIBER ENTRANCE TERMINALS Indoor/Outdoor optical transition enclosure designed for wall mounting. Made of weather resistant thermal plastic. Small form factor for FTTH, FTTB and MDU drops. These enclosures are used for patch only or patch and splice configurations. FET1G - XX X XX X Fibers Fiber Type Adapters Loading Configuration 01 02 03 04* R = Singlemode K = MM62.5 OM1 S = MM50 OM3 LC = LC SC = SC SA = SC APC NA = None N = Patch Only 9 = 900um Pigtails Splice Chip (2 port maximum) * Patch & splice configuration 2 port maximum, patch only up to 4 ports 505FT - XX X XX X X X Fiber Ports Fiber Type Adapters Pigtails Splitter Type Grommets (Optional) 01-04 R = Singlemode K = MM62.5 OM1 S = MM50 OM3 LC = LC-UPC LA = LC-APC SC = SC-UPC SA = SC-APC N = Patch Only 5 = 250um Pigtails 9 = 900um Pigtails 0 = None 1 = 1x4 None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Conduit Grommet (1/2”), 1 Standard Grommet P = 1 Conduit Grommet (1/2”), 1 Compression Grommet Q = 2 Compression Grommets FET2G-CON-GRM-KIT3/4 FET2G-CON-GRM-KIT1/2 FET2G-CMP-GRM-KIT3/4 FET2G-CMP-GRM-KIT1/2 Custom logo printing is available on all enclosures. Please call for pricing & availability. Dimensions (height x width x depth): 8.1” x 5.6” x 2.6” (20.57 cm x 14.22 cm x 6.60 cm)
FIBER ENTRANCE TERMINALS 7 www.tiitech.com FET3 SERIES - INDOOR/OUTDOOR POLE OR WALL MOUNT 36F FIBER ENTRANCE TERMINALS The FET3 Fiber Enclosure is a compact unit which features connectivity between the OSP fiber drops and customer fiber drops. The weatherproof design is ideally suited for outdoor installations and is configured for up to 36 patch and splice or PON splitter terminations. NEMA-4 rated. FET3G-16RSAN21 Fiber Entry Terminal 16 Port Patch Panel SC-APC 1x8 Splitter FET3G-16RSAN22 Fiber Entry Terminal 16 Port Patch Panel SC-APC Dual 1x8 Splitter FET3G-24RSAN00 Fiber Entry Terminal 24 Port Patch Panel SC-APC FET3G-24RSA900 Fiber Entry Terminal 24 Port Patch and Splice Panel SC-APC SM 900um Pigtails FET3-WMKIT Optional FET3 Stand Off Wall Mount Kit Dimensions (height x width x depth): 10.26” x 9.94” x 2.91” (26.0 cm x 25.2 cm x 7.4 cm) Dimensions (height x width x depth): 12.62” x 10.16” x 4.48” (32.05 cm x 64 cm x 11.38 cm) FET2 SERIES - 16F FIBER ENTRANCE TERMINALS Indoor/Outdoor enclosure designed for wall or pole mounting. Made of weather resistant thermal plastic. Small form factor for FTTH, FTTB and MDU drops. These enclosures are used for patch only or patch and splice configurations. NEMA-4 rated. FET3G- XX X XX XX X X Fiber Ports Fiber Type Adapters Pigtails Splitter Type Splitter Qty. 04 08 12 16 24 36 (LC only) R = Singlemode K = MM62.5 OM1 S = MM50 OM3 LC = LC SC = SC SA = SC APC N = None 5 = 250um Pigtails 9 = 900um Pigtails R = 12 Fiber Ribbon Pigtail 0 = None 1 = 1x4 2 = 1x8 3 = 1x16 0-2 FET2G Fiber Entry Terminal Empty 1 LGX Adapter Plate Capacity FET2G-06RSA9 Fiber Entry Terminal 6 Port Patch and Splice Panel SC-APC SM 900um Pigtail FET2G-08RSA9 Fiber Entry Terminal 8 Port Patch and Splice Panel SC-APC SM 900um Pigtail FET2G-12RSA9 Fiber Entry Terminal 12 Port Patch and Splice Panel SC-APC SM 900um Pigtail FET2G - XX X XX X X X X Fiber Ports Fiber Type Adapters Pigtails Splitter Type Splitter Qty. Grommets (Optional) 01-06 08* 10* 12* 16* R = Singlemode K = MM62.5 OM1 S = MM50 OM3 LC = LC-UPC LA = LC-APC SC = SC-UPC SA = SC-APC N = Patch Only 5 = 250um Pigtails 9 = 900um Pigtails R = 12 Fiber Ribbon Pigtail 0 = None 1 = 1x4 2 = 1x8 0-2 None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet (1/2”) P = 1 Conduit Grommet (1/2”), 1 Compression Grommet FET2G-CON-GRM-KIT3/4 FET2G-CON-GRM-KIT1/2 FET2G-CMP-GRM-KIT3/4 FET2G-CMP-GRM-KIT1/2 *08, 10, 12, 16 - Duplex Adapters
FIBER ENTRANCE TERMINALS 8 www.tiitech.com FET4 SERIES - 48F INDOOR/OUTDOOR NEMA-4 RATED FIBER ENTRANCE TERMINAL The FET4 Indoor/Outdoor Fiber Entrance Terminal is a compact unit designed for connectivity between OSP and multiple fiber drops, ideally suited for outdoor pole or wall mount installations. The FET4 utilizes high density modular cassettes for patch and splice solutions for up to 48 customer service drops. A flexible design supports a wide range of deployment styles including fusion splicing and field termination. NEMA-4 rated. Dimensions (height x width x depth): 12.77” x 12.52” x 7.15” (32.44 cm x 31.80 cm x 18.16 cm) FET4G-48RSA9 48 Port, 12 Fiber MPO Input Cassette, SC-APC Adapters, 900um Pigtails FET4G-48RSA9 48 Port, Single Fusion Input Cassette, SC-APC Adapters, 900um Pigtails FET4G-48RNAN 48 Port, Single Fusion Input Cassette for Splice Only FET4G - XX X XX X Fiber Ports Fiber Type Adapters Pigtail 12 24 36 48 R = Singlemode K = MM62.5 OM1 S = MM50 OM NA = None SC = SC/UPC SA = SC/APC LC = LC/UPC LA = LC/APC N = None 5 = 250um 9 = 900um R = Ribbon M = 12F MPO Connector
FIBER ENTRANCE TERMINALS 9 www.tiitech.com HCCP X X X XX X X X Cable Ports Mounting Style Fiber Type Adapter Type Distr. Count Distribution Style Splice Trays 24SF/72MF 3 = Bottom Standard (NEMA 3) 4 = Bottom Conduit (NEMA 4) A = Top/Bottom Standard (NEMA 3) C = Top/Bottom Conduit (NEMA 3) W = Wall P = Pole or Wall R = SM G.657A1 N = SM G.657A2 Z = SM G.657B3 LC = LC/UPC SA = SC/APC SC = SC/UPC B = 12 F = 24 H = 36 J = 48 L = 72 N = 96** P = 144** C = Cassette Adapter only 9 = Cassette 900um Pigtail R = Cassette Ribbon Pigtail 0 - 4* * Feeder and distributor splicing is done inside cassettes, these trays are for express tables ** 96 and 144 are LC only Note: Other options and accessories are also available - please contact Tii customer service. HCCP SERIES MODULAR FIBER PATCH & SPLICE ENCLOSURE Hybrid Connectivity Closure is a NEMA-4 rated family of plastic enclosures for indoor and outdoor use that can be wall or pole mounted. The HCCP is configured as a high density modular cassette patch and splice solution for up to 72 customer service drops. Flexible design and options support a wide range of deployment styles including fusion splicing and field termination. ORDERING INFORMATION - BASE MODEL HCCP3 HCC Bottom Entry NEMA 3 for Indoor Use Rubber and Split Grommets HCCP4 HCC Bottom Entry NEMA 4 for Indoor and Outdoor Use Conduit HCCPA HCC Top/Bottom Entry NEMA 3 for Indoor Use Rubber and Split Grommets HCCPC HCC Top/Bottom Entry NEMA 3 for Indoor Use Conduit CASSETTES AND ADAPTER PLATES HPC-12RSAR Patch & Splice Cassette 12 Fiber SC-APC Ribbon HPC-12RSA9 Patch & Splice Cassette 12 Fiber SC-APC 900um HPC-12RSAN Patch Cassette 12 SC-APC Adapters only (no pigtails) HPP-12RSAN Adapter Plate 12 SC-APC (no pigtails) OTHER ACCESSORIES FST-AUNIV Splice Tray, 24 Single / 6 Mass Fusion FSK-HCC Skirt, Fixed 25” ASK-HCC Skirt, Adjustable 25 – 51 Inch PMB-HCC Pole Mount Bracket Kit HCCE-PORT Cable Entry Split 3-Piece with Grommet HCCN-GROM Cable Entry Conduit ¾, 1, 1.5 Inch with Cone HCCR-GROM Cable Entry Rubber Grommet Dimensions (height x width x depth): 16.2” x 17.2” x 8.2” (41.15 cm x 43.69 cm x 52.91 cm)
FIBER INTERFACE DEVICES / SLACK STORAGE TERMINALS 10 www.tiitech.com 171F -XX -X -XX -X -X **ADAPTER MOUNTING OPTIONS MIDDLE PLATE FOR POWER CONNECTIONS GROUND STUD SPLIT RATIO SPLITTER QTY. 00 = No FP Plate, No Adapters 01 = FP Plate, No Adapters U1 = One SC UPC Adapters on FP01 Plate U2 = Two SC UPC Adapters on FP01 Plate A1 = One SC APC Adapters on FP01 Plate A2 = Two SC APC Adapters on FP01 Plate 0 = None 1 = Middle Plate 0 = None 1 = Ground Stud 0 = None 1 = 1x8 4 = 1x4 0-2 Dimensions (height x width x depth): 6.67” x 6.56” x 2.87” (16.94 cm x 16.66 cm x 7.29 cm) NEMA-4 rated. Terminates up to two single-fiber cables (four with LC). Optional copper connectivity interface for Small Cells, DAS, or G.fast **Please contact customer service for LC model number FIBER INTERFACE DEVICES/PATCH ‘N’ SLACK STORAGE UNITS Fiber Interface Device/Patch ‘N’ Slack Storage Units are compact units which features connectivity between fiber drop and customer fiber drop, as well as slack storage. Enclosures are available in a variety of sizes to accommodate up to 12 fiber terminations and installation locations. FIBER ADAPTER PLATE SERIES The FP01, FP02 & FP04 Series are single, 6 port and 12 port fiber adapter plates that attach into Tii’s 169F, 171F, 506F, 507F, 508F, 509F and OD-ONT-ENC Series Fiber Enclosures. The fiber plate functions as a patch point for the incoming fiber drop and distribution out to the customer. 169F -XX -XX ADAPTER TYPE NO. OF PORTS 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 02 = 2 03 = 4 Dimensions (height x width x depth): 6.11” x 4.33” x 2.15” (15.5 cm x 11.0 cm x 5.5 cm) Up to 4 fibers, indoor or outdoor FP XX -XX -XX Series Adapter Type Number of Ports 01 = Single Port 02 = 6 Port 04 = 12 Port 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 02 = 2 04 = 4 06 = 6 (FP02 series only) 12 = 12 (FP04 series SC only) 12 = 24 (FP04 series LC only) FP01 Dimensions (height x width x depth): 4.23” x 3.60” x 1.50” (10.74 cm x 9.14 cm x 3.81 cm) FP02 Dimensions (height x width x depth): 2.01” x 3.58” x 1.71” (5.11 cm x 9.09 cm x 4.34 cm) FP04 Dimensions (height x width x depth): 2.42” x 3.63” x 2.01” (6.15 cm x 9.22 cm x 5.11 cm) ACCESSORIES 506F-GRM-KIT Grommets for 506F Standard Grommet (2 ea.) 506F-CMP-GRM-KIT Grommets for 506F 1/2” Compression Entry (2 ea.) 506F-CON-GRM-KIT1/2 Grommets for 506F 1/2” Conduit Entry (2 ea.) 506F-CON-GRM-KIT3/4 Grommets for 506F 3/4” Conduit Entry (2 ea.) FP2G-06RSAN00* 6 Port Patch & Splice Base SC/APC Adapters used in 506F Series Enclosures FP2R-K9-01-01-100-1 Fiber Spooling System with 100’ of Flat Bend Insensitive MicroDrop Cable for use with 506F FP2R-K9-01-01-100-01 FP2G-06RSAN00 *Please contact customer service for additional port count configurations
FIBER INTERFACE DEVICES / SLACK STORAGE TERMINALS 11 www.tiitech.com Reeled customer distribution fiber allows for fast deployment 506R -XX -XX -XX -XXX -X X -XX Housing Cable Type Adapter Type Adapter Qty Length in Ft Configuration Options Grommets (optional) Optional Pre-peel K9 = MicroDrop KD = Duplex* 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 025 050 075 100 125 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed Blank = 2 Standard Grommets C = (2) 1/2” Conduit Grommets G = 1 Standard Grommet, (1) 1/2” Conduit Grommet Blank = No Pre-Peel, No Pull Sock PE = No Pre-Peel, with Pull Sock 01 = ¼” of Peel Exposed with No Pull Sock 02 = ¼” of Peel Exposed with Pull Sock 505F -XX -XX -XX -X X Adapter Mounting Options Adapter Type # of Ports Configuration Options Grommets (Optional) 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 04 = 4 06 = 6 12 = 12 24 = 24 (LC only) N = None E = External Ground None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet (1/2”) P = 1 Conduit Grommet (1/2”), 1 Compression Grommet NEMA-4 rated compact solution supports up to 4 fibers in patch, patch and splice, mid-span access or PON splitter applications Dimensions (height x width x depth): 8.1” x 5.6” x 2.6” (20.57 cm x 14.22 cm x 6.60 cm) Dimensions (height x width x depth): 10.4” x 9.9” x 2.9” (26.41 cm x 25.14 cm x 7.36 cm) * KD Duplex cable only accommodates up to a 75ft. length
FIBER INTERFACE DEVICES / SLACK STORAGE TERMINALS 12 www.tiitech.com 506F* -XX -XX -XX -X -X SERIES ADAPTER TYPE NO. OF PORTS CONFIGURATION OPTIONS GROMMETS (OPTIONAL) 01 = Fiber Plate (1, 2, or 4 Adapters only) 02 = Fiber Plate (6 Adapters) 04 = Fiber Plate (12 Adapters) 01 = SC-APC 02 = SC-UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 04 = 4 06 = 6 12 = 12 24 = 24 (LC only) N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet (3/4”) P = 1 Conduit Grommet (3/4”), 1 Compression Grommet Dimensions (height x width x depth): 10.4” x 9.9” x 2.9” (26.41 cm x 25.14 cm x 7.36 cm) Up to 12 fibers, up to 50’ slack storage, indoor or outdoor 507F -XX -XX -XX SERIES ADAPTER TYPE NO. OF PORTS 01 - Fiber Plate (1, 2, or 4 adapters) 02 - Fiber Plate (6 adapters) 03 - 1.5” Fiber Storage Tray 04 - Fiber Plate (12 adapters) 01 - SC-APC 02 - SC-UPC 01 = 1 02 = 2 03 = 3 04 = 4 06 = 6 12 = 12 24 = 24 (LC only) Dimensions (height x width x depth): 11.92” x 8.38” x 3.19” (30.3 cm x 21.2 cm x 8.1 cm) Up to 12 fibers, up to 50’ slack storage ACCESSORIES 506F-GRM-KIT Grommets for 506F Standard Grommet (2 ea.) 506F-CMP-GRM-KIT Grommets for 506F 1/2” Compression Entry (2 ea.) 506F-CON-GRM-KIT1/2 Grommets for 506F 1/2” Conduit Entry (2 ea.) 506F-CON-GRM-KIT3/4 Grommets for 506F 3/4” Conduit Entry (2 ea.) FP2R-K9-01-01-100-1 Fiber Spooling System with 100’ of Flat Bend Insensitive MicroDrop Cable for use with 506F 506F-GRM-KIT 506F-CON-GRM-KIT3/4 506F-CON-GRM-KIT1/2 506F-CMP-GRM-KIT1/2 FIBER INTERFACE DEVICES/ PATCH ‘N’ SLACK STORAGE UNITS Fiber Interface Device/Slack Storage Units are compact units which feature SC connectivity between the OSP fiber drop and customer fiber drop, as well as slack storage. Enclosures are available in a variety of sizes to accommodate up to 12 fiber terminations and installation locations. Custom logo printing is available on all enclosures. Please call for pricing & availability. *Please change “F” to “G” for cover with gasket
FIBER INTERFACE DEVICES / SLACK STORAGE TERMINALS 13 www.tiitech.com 508F -XX -XX -XX -X -X ADAPTER PLATE ADAPTER TYPE NO. OF ADAPTERS CONFIGURATION OPTIONS GROMMETS (OPTIONAL) 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 03 = 1.5” Fiber Storage Tray 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 03 = 3 04 = 4 06 = 6 12 = 12 24 = 24 (LC only) N = None C = Cable Entry Clamp E = External Ground D = External Ground & Cable Entry Clamp Installed None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet Dimensions (height x width x depth): 12.54” x 8.39” x 3.19” (31.9 cm x 21.3 cm x 8.1 cm) Designed for rigid drop fiber installations with up to a 3 inch bend radius. NEMA-4 rated. ACCESSORIES 508F-GRM-KIT Grommets for 508F (2 ea.) 508F-CON-GRM-KIT Grommets for 508F 1” Conduit Entry (2 ea.) 508F-GRM-KIT 508F-CON-GRM-KIT Reel preloaded with up to 125 feet of connectorized distribution fiber, slack storage accommodates up to 75 ft of OSP flat drop cable. NEMA-4 rated. 509R -XX -XX -XX -XXX X -XX Cable Type Adapter Type Adapter Qty Length in FT Grommets (Optional) Optional Pre-Peel K9 = MicroDrop KD = Duplex 01 = SC-APC 02 = SC-UPC 01 = 1 02 = 2 025 050 075 100 125 None = 4 Standard Grommets C = 2 Conduit Grommets, 2 Standard Grommets (Pos. B-D) G = 3 Standard Grommets, 1 Conduit Grommet, 1/2” (Pos. B) P = 2 Standard Grommets, 1 Conduit Grommet, 1/2” (Pos. B), 1 Compression Grommet, 1/2” (Pos. D) Blank = No Pre-Peel, No Pull Sock PE = No Pre-Peel, with Pull Sock 01 = ¼” of Peel Exposed with No Pull Sock 02 = ¼” of Peel Exposed with Pull Sock 509R-CON-GRM-KIT1/2 509R-GRM-KIT 509R-CMP-GRM-KIT1/2 Dimensions (height x width x depth): 11.9” x 13.5” x 3.2” (30.22 cm x 34.29 cm x 8.12 cm) ACCESSORIES 509R-GRM-KIT Grommets for 509R Standard Grommet (2 ea.) 509R-CMP-GRM-KIT1/2 Grommets for 509R 1/2” Compression Entry (2 ea.) 509R-CON-GRM-KIT1/2 Grommets for 509R 1/2” Conduit Entry (2 ea.)
WALLMOUNTS 14 www.tiitech.com DOUBLE DOOR WALLMOUNT DISTRIBUTION ENCLOSURES Indoor double door wall mount fiber distribution panels. A separate provider key locking door allows secure termination of service drops. Telco grade construction using powder coat aluminum. Panel sizes include 2, 4, 8, 12 adapter plate capacity options. PSC and MFM cassette ready for economical stocking and fast modular deployment, or available custom factory loaded with adapters, trays, pigtails and cable stubs. WM01BT Wallmount Patch and Splice Panel Extended Door 1 Plate Capacity 5.5” x 9.25” x 1.25” WM02BT Wallmount Patch Panel Double Door 2 Plate Capacity 11” x 15” x 3.5” WM04BT Wallmount Patch Panel Double Door 4 Plate Capacity 11” x 15” x 3.5” WM08BT Wallmount Patch Panel Double Door 8 Plate Capacity 11” x 15” x 6.0” WM12BT Wallmount Patch Panel Double Door 12 Plate Capacity 15” x 15” x 6.0” PSCxxxxxxx PSC Patch and Splice Cassette FST-ASF24 Splice Tray 24 Single Fusion FST-AMF06 Splice Tray 6 Mass Fusion WM X BT XXX X XX X CHASSIS FIBER PORTS FIBER TYPE ADAPTER PIGTAILS & SPLICE TRAYS 01 = 1 Plate 02 = 2 Plate 04 = 4 Plate 08 = 8 Plate 12 = 12 Plate 006 008 012 024 036 048 072 096 144 R = Singlemode K = MM62.5 OM1 C = MM50 OM2 S = MM50 OM3 FC = FC FA = FC APC LC = LC SC = SC SA = SC APC N = None 9 = 900um R = 12 Fiber Ribbon PSC CASSETTE COMPATIBLE (SEE PAGE 18)
WALLMOUNTS 15 www.tiitech.com WALLMOUNT DISTRIBUTION ENCLOSURES Indoor single door wall mount fiber distribution panel. All-purpose construction using powder coat steel. Panel sizes include 1, 2, 4, 8 adapter plate capacity options. The WM2/4/8 are PSC and MFM cassette ready for economical stocking and fast modular deployment, or all sizes available custom factory loaded with adapters, trays, pigtails and cable stubs. WM X PBF XXX X XX X X CHASSIS FIBER PORTS FIBER TYPE ADAPTER PIGTAILS OPTIONS 1 = 1 Plate Mini 2 = 2 Plate 4 = 4 Plate 8 = 8 Plate 006 008 012 024 036 048 072 096 R = Singlemode K = MM62.5 OM1 C = MM50 OM2 S = MM50 OM3 FC = FC FA = FC/APC LC = LC SC = SC SA = SC/APC N = None 5 = 250um MIC 9 = 900um MIC R = 12 Fiber Ribbon L = Key Lock Installed (Not available in Mini) WM1PBF Mini Patch Panel Empty 1 Adapter Plate Capacity & Splice Chip 1.25” x 5.5” x 6.25” WM2PBF 12-Port Patch Panel Empty 2 Adapter Plate Capacity 9.5” x 13” x 3.5” WM4PBF 24-Port Patch Panel Empty 4 Adapter Plate Capacity 11.5” x 13” x 3.5” WM8PBF 48-Port Patch Panel Empty 8 Adapter Plate Capacity 17” x 12” x 6” PSCxxxxxxx PSC Patch and Splice Cassette FST-ASF24 Splice Tray 24 Single Fusion FST-AMF06 Splice Tray 6 Mass Fusion PSC CASSETTE COMPATIBLE (SEE PAGE 18)
RACKMOUNTS 16 www.tiitech.com RACKMOUNT FIBER DISTRIBUTION PANELS Indoor rackmount fiber distribution panels. All-purpose construction using powder coat steel. Panel sizes include 2, 3, 4, 6, 8, 12 adapter plate capacity options. Reversible rackmount ears for 19 or 23” installations. Optional 2, 3, 4RU flush mount 19” kit available. Slide out master tray is removable from either front or rear doors. PSC and MFM cassette ready for economical stocking and fast modular deployment, or available custom factory loaded with adapters, trays, pigtails and cable stubs. RACKMOUNT SLACK STORAGE UNITS Rackmount fiber slack storage enclosure to manage excessive lengths of preterminated cable assemblies in a small footprint. Designed to mount in a 19” or 23” relay rack. Removable sliding drawer with slack retention features. Available in 1RU and 2RU sizes. RM XXX B XXX X XX X CHASSIS FIBER PORTS FIBER TYPE ADAPTER PIGTAILS 1U2 = 1U 2 Plate 1U3 = 1U 3 Plate 2U4 = 2U 4 Plate 2U6 = 2U 6 Plate 3U8 = 3U 8 Plate 4UX = 4U 12 Plate 006 012 024 036 048 072 096 144 R = Singlemode K = MM62.5 OM1 C = MM50 OM2 S = MM50 OM3 FC = FC FA = FC/APC LC = LC SC = SC SA = SC/APC ST = ST N = None 5 = 250um 9 = 900um R = 12 Fiber Ribbon RM1U2B 1RU Patch Panel Empty 2 Adapter Plate Capacity 1.71” x 17.0” x 14.25” RM1U3B 1RU Patch Panel Empty 3 Adapter Plate Capacity 1.71” x 17.0”x 14.25” RM2U4B 2RU Patch Panel Empty 4 Adapter Plate Capacity 3.44” x 17.0” x 14.25” RM2U6B 2RU Patch Panel Empty 6 Adapter Plate Capacity 3.44” x 17.0” x 14.25” RM3U8B 3RU Patch Panel Empty 8 Adapter Plate Capacity 5.30” x 17.0” x 14.25” RM4UXB 4RU Patch Panel Empty 12 Adapter Plate Capacity 6.95” x 17.0” x 14.25” RM-FM-1U Flushmount Kit Rackmount 1U RM-FM-2/3U Flushmount Kit Rackmount 2U or 3RU RM-FM-4U Flushmount Kit Rackmount 4RU PSCxxxxxxx PSC Patch and Splice Cassette FST-ASF24 Splice Tray 24 Single Fusion FST-AMF06 Splice Tray 6 Mass Fusion (72 Fiber) RM1UBSS 1RU Slack Storage Enclosure RM2UBSS 2RU Slack Storage Enclosure RM1UBSS: 1.71” H x 17”W x 14.14” D (4.45 cm x 43.18 cm x 36.20 cm) RM2UBSS: 3.43” H x 17”W x 14.14” D (8.89 cm x 43.18 cm x 36.20 cm) PSC CASSETTE COMPATIBLE (SEE PAGE 18)
RACKMOUNTS 17 www.tiitech.com RM1U2S - SWINGOUT PATCH AND SPLICE PANEL The RM1U2S is a 1 RU, 2 termination panel rackmount fiber distribution unit designed to support both patching and splicing in one unit. The enclosure has a swing out master panel that allows for easy access of terminations, fiber management and splicing. RM1U2S XXX X XX X FIBER PORTS FIBER TYPE ADAPTER PIGTAILS & SPLICE TRAYS 006 012 016 018 024 048 R = Singlemode K = MM62.5 OM1 C = MM50 OM2 S = MM50 OM3 LC - LC SC - SC SA - SC APC N = None 9 = 900um R = 12 Fiber Ribbon 5 = 250um RACKMOUNT BRACKETS 1 RU 19 inch rackmount master plate with 3 LGX module/cassette capacity. Available with and without backbone cable slack storage support. Designed for LGX adapter plates, MTP cassette and Coupler splitter modules. STUBBED HOUSINGS Our wall and rackmount patch panels are also available factory loaded with a fiber stub pigtail. Contact your sales representative for additional information and product configuration assistance. Dimensions (height x width x depth): 1.71” x 17.0” x 13.26” (4.45 cm x 43.18 cm x 33.68 cm) MP1U3B 1RU Master Plate 3 LGX Module Capacity MP1U3BSS 1RU Master Plate 3 LGX Module Capacity with Slack Storage Support ACCOMMODATES FSM SERIES LGX SPLITTER MODULES (SEE PAGE 32)
PATCH AND SPLICE CASSETTES 18 www.tiitech.com PSC SERIES - PATCH AND SPLICE CASSETTES Patch and splice cassette terminates up to 24 fibers in a single slot LGX-118mm industry standard patch panel. The modular design allows for simplified network expansion and upgrades. The PSC replaces the need for custom factory loading of patch and splice panels, or stocking multiple plates, splice trays and pigtails. Reduce lead time and increase flexibility with the PSC cassette solution. SINGLE FUSION 900UM PIGTAILS INTERFACE PORTS OS-2 G.657A1 MM62.5 OM-1 MM50 OM-2/3/4 LC APC 6 PSC06RLA9B 12 PSC12RLA9B 24 PSC24RLA9B LC UPC 6 PSC06RLC9B PSC06KLC9B PSC06SLC9B 12 PSC12RLC9B PSC12KLC9B PSC12SLC9B 24 PSC24RLC9B PSC24KLC9B PSC24SLC9B SC APC 6 PSC06RSA9B 12 PSC12RSA9B SC UPC 6 PSC06RSC9B PSC06KSC9B PSC06SSC9B 12 PSC12RSC9B PSC12KSC9B PSC12SSC9B ST UPC 6 PSC06RST9B PSC06KST9B PSC06SST9B 12 PSC12RST9B PSC12KST9B PSC12SST9B MASS FUSION RIBBON PIGTAILS INTERFACE PORTS OS-2 G.657A1 MM62.5 OM-1 MM50 OM-2/3/4 LC APC 12 PSC12RLARB 24 PSC24RLARB LC UPC 12 PSC12RLCRB PSC12KLCRB PSC12SLCRB 24 PSC24RLCRB PSC24KLCRB PSC24SLCRB SC APC 12 PSC12RSARB SC UPC 12 PSC12RSCRB PSC12KSCRB PSC12SSCRB ACCESSORIES LG1-CCH Conversion Plate LGX118 to CCH BKT-PSC1 Mounting Bracket, 1 Cassette BKT-PSC2 Mounting Bracket, 2 Cassettes PSC Series Cassette installed inside the 507F Series Enclosure using the BKT-PSC2 Mounting Bracket Dimensions (height x width x depth): 1.14” x 6.14 x 4.10” (28.96 cm x 155.96 cm x 104.14 cm)
ADAPTER PLATES 19 www.tiitech.com STYLE ADAPTERS FIBER PORTS USE HOUSING SLEEVE MODEL # FC 6 6 SM/MM Metal Zirconia LG1-FC06SR-X FC 8 8 SM/MM Metal Zirconia LG1-FC08SR-X FC 12 12 SM/MM Metal Zirconia LG1-FC12SR-X FC APC 6 6 SM APC Metal Zirconia LG1-FA06SR-X FC APC 8 8 SM APC Metal Zirconia LG1-FA08SR-X FC APC 12 12 SM APC Metal Zirconia LG1-FA12SR-X LC Duplex 6 12 SM Blue Zirconia LG1-LC06D1-X LC Duplex 6 12 SM APC Green Zirconia LG1-LC06D3-X LC Duplex 6 12 MM Beige PB LG1-LC06DB-X LC Duplex 6 12 MM Aqua PB LG1-LC06DA-X LC Quad 6 24 SM Blue Zirconia LG1-LC06Q1-X LC Quad 6 24 SM APC Green Zirconia LG1-LC06Q3-X LC Quad 6 24 MM Beige PB LG1-LC06QB-X LC Quad 6 24 MM Aqua PB LG1-LC06QA-X SC 6 6 SM Blue Zirconia LG1-SC06S1-X SC 6 6 SM APC Green Zirconia LG1-SC06S3-X SC 6 6 MM Beige PB LG1-SC06SB-X SC 6 6 MM Aqua PB LG1-SC06SA-X SC 8 8 SM Blue Zirconia LG1-SC08S1-X SC 8 8 SM APC Green Zirconia LG1-SC08S3-X SC 8 8 MM Beige PB LG1-SC08SB-X SC 8 8 MM Aqua PB LG1-SC08SA-X SC Duplex 6 12 SM Blue Zirconia LG1-SC06D1-X SC Duplex 6 12 SM APC Green Zirconia LG1-SC06D3-X SC Duplex 6 12 MM Beige PB LG1-SC06DB-X SC Duplex 6 12 MM Aqua PB LG1-SC06DA-X ST 6 6 SM/MM Metal Zirconia LG1-ST06SR-X ST 6 6 MM Metal PB LG1-ST06SK-X ST 8 8 SM/MM Metal Zirconia LG1-ST08SR-X ST 8 8 MM Metal PB LG1-ST08SK-X ST 12 12 SM/MM Metal Zirconia LG1-ST12SR-X ST 12 12 MM Metal PB LG1-ST12SK-X NONE 0 0 N/A N/A N/A LG1-BLANK-X ADAPTER PLATES LGX compatible adapter plates available in black, white, and almond. Replace “-x” with plate color option: “-B “= black, “-W” = white, “-M” = almond/beige
TSL SERIES 20 www.tiitech.com TSL LGX PATCH & SPLICE ENCLOSURES The TSL LGX Fiber Termination Panels provide connectivity up to 144 (288 LC) ports. Available loaded with adapter plates, 250um, 900um or ribbon pigtails and splice bay. TSL shelves have been designed to meet Telcordia GR-63 and GR-449 requirements and are best utilized in Central Office and Data Center applications. 19” or 23” rackmount with modular LGX rack & stack form factor. RM X UWL XXX X XX X CHASSIS FIBER PORTS FIBER TYPE ADAPTER PIGTAILS 3 = 3 RU Patch & Splice Combo 4 = 4 RU Patch 5 = 5 RU Patch 7 = 4 RU Patch 3 RU Splice 8 = 5 RU Patch 3 RU Splice 9 = 5 RU Patch 4 RU Splice 072 096 144 288 (LC only) R = Singlemode K = MM62.5 OM1 C = MM50 OM2 S = MM50 OM3 FC = FC FA = FC APC LC = LC LA = LC APC SC = SC SA = SC APC ST = ST N = None 5 = 250um 3m with Bay & Trays 9 = 900um 3m with Bay & Trays X = 900um 4m No Splice Bay R = Ribbon 3m with Bay & Trays Z = Ribbon 4m No Splice Bay ENCLOSURE RM3UWL RM4UWL RM5UWL RM7UWL RM8UWL RM9UWL PROPERTY 3 RU PATCH & SPLICE COMBO 4RU PATCH 5RU PATCH 4RU PATCH 3RU SPLICE 5RU PATCH 3RU SPLICE 5RU PATCH 4RU SPLICE TYPICAL PORTS 24/48 72/96/144 144/288 72/96/144 144 288 PLATES 4 12 12 12 12 12 PLATE SIZE 118 118 170 118 170 170 SPLICE TRAYS 1 0 0 2 (3 LC) 3 6 DIMENSIONS 5.25x17x11 7 x 17 x 11 9 x 17 x 11 12.25 x 17 x 11 14 x 17 x 11 15.75 x 17 x 11 PACKAGING 8 X 20 X 14 10 x 20 x 14 12 x 20 x 14 15 x 20 x 14 18 x 20 x 14 18 x 20 x 14 WEIGHT 12 13 15 24 27 30 MATERIAL Aluminum, Central Office White
MAMU SERIES 21 www.tiitech.com MULTI-ACCESS MODULAR UNIT (MAMU) The MAMU unit is comprised of several TSL termination shelves and one splice shelf. Each TSL is equipped with connector panels and fiber pigtails in either ribbon or 250um single fiber. Each splice shelf is equipped with mass-fusion or single-fusion splice organizers. All of the shelves are secured together in the factory, shipped and installed as a single unit. FIBER PORTS CONNECTORS HEIGHT MODEL NUMBER DESCRIPTION OS-2 288 SC 15RU MAMU-5/5-288-RSC5 288 Port Singlemode SC 250um, (2) 144 Port 5RU Patch Panels, (1) 5RU Splice Bay, (6) 48 Fiber Splice Trays OS-2 288 SC-APC 15RU MAMU-5/5-288-RSA5 288 Port Singlemode SC-APC 250um, (2) 144 Port 5RU Patch Panels, (1) 5RU Splice Bay, (6) 48 Fiber Splice Trays OS-2 Ribbon 288 SC 13RU MAMU-5/3-288-RSCR 288 Port Singlemode SC Ribbon, (2) 144 Port 5RU Patch Panels, (1) 3RU Splice Bay, (2) 144 Fiber Mass Splice Trays OS-2 Ribbon 288 SC-APC 13RU MAMU-5/3-288-RSAR 288 Port Singlemode SC-APC Ribbon, (2) 144 Port 5RU Patch Panels, (1) 3RU Splice Bay, (2) 144 Fiber Mass Splice Trays OS-2 Ribbon 432 LC 15RU MAMU-4/3-432-RLCR 432 Port Singlemode LC Ribbon, (3) 144 Port 4RU Patch Panels, (1) 3RU SPLICE BAY, (3) 216 Fiber Mass Splice Trays OS-2 Ribbon 432 SC 18RU MAMU-5/3-432-RSCR 432 Port Singlemode SC-APC Ribbon, (3) 144 Port 5RU Patch Panels, (1) 3RU Splice Bay, (3) 216 Fiber Mass Splice Trays OS-2 Ribbon 432 SC-APC 18RU MAMU-5/3-432-RSAR 432 Port Singlemode SC-APC Ribbon, (3) 144 Port 5RU Patch Panels, (1) 3RU Splice Bay, (3) 216 Fiber Mass Splice Trays OS-2 Ribbon 864 LC 20RU MAMU-5/5-864-RLCR 864 Port Singlemode LC Ribbon, (3) 288 Port 5RU Patch Panels, (1) 5RU Splice Bay, (6) 216 Fiber Mass Splice Trays OS-2 Ribbon 864 SC 35RU MAMU-5/5-864-RSCR 864 Port Singlemode SC Ribbon, (6) 144 Port 5RU Patch Panels, (1) 5RU Splice Bay, (6) 216 Fiber Mass Splice Trays OS-2 Ribbon 864 SC-APC 35RU MAMU-5/5-864-RSAR 864 Port Singlemode SC-APC Ribbon, (6) 144 Port 5RU Patch Panels, (1) 5RU Splice Bay, (6) 216 Fiber Mass Splice Trays
DATA CENTER PRODUCTS 22 www.tiitech.com DATA CENTER PRODUCTS MTP/MPO based plug in cassettes for high density fiber distribution. Factory terminated MTP trunk cables and MTP modules provide the highest density and will reduce installation labor costs up to 75%. RDC SERIES - RACKMOUNT DATA CENTER DISTRIBUTION PANELS Indoor high density rackmount fiber distribution panels. All-purpose construction using powder coat steel. Reversible rackmount ears for 19 or 23” installations. Stackable panels with top and bottom pass-through routing of high fiber count feeder cables or pigtails. PSC and MFM cassette ready for economical stocking and fast modular deployment, or available custom factory loaded with adapters, trays, pigtails and cable stubs. RDC3 9RU Patch Panel 36 Adapter Plate Capacity - Empty RDCS6E 4RU Splice Bay 6 Tray Capacity - Empty TRAY18MF Splice Tray 18 Mass Fusion TRAY48SF Splice Tray 48 Single Fusion *Note replace “xxx” with 3 digit length of cable assembly. TRUNK CABLES Micro Distribution Cable / OFNP Rated Cable / PWF A-B Polarization FIBERS MM50 OM-3 SINGLEMODE OS-2 12 SBD5PA-TPTPxxxF-B RBD5P9-TPTPxxxF-C 24 SFD5PA-TPTPxxxF-BPE RFD5P9-TPTPxxxF-CPE 48 SJD5PA-TPTPxxxF-BPE RJD5P9-TPTPxxxF-CPE 72 SLD5PA-TPTPxxxF-BPE RLD5P9-TPTPxxxF-CPE 144 SPD5PA-TPTPxxxF-BPE RPD5P9-TPTPxxxF-CPE MTP/LC CASSETTES A-A Polarization FIBERS MM50 OM-3 SINGLEMODE OS-2 12 MFM-S12LCBA MFM-R12LCBA 24 MFM-S24LCBA MFM-R24LCBA DUPLEX PATCH CORDS 2x4mm Zipcord / OFNR Rated Cable FIBERS MM50 OM-3 SINGLEMODE OS-2 LC/LC S2Z2RA-LCLCxxxMC R2Z2R9-LCLCxxxMC LC/SC S2Z2RA-LCSCxxxMC R2Z2R9-LCSCxxxMC *Note replace “xxx” with 3 digit length of cable assembly. RACKMOUNT PATCH PANELS 19” or 23” RM1U3B 1U Rackmount 3 Module Capacity RM4UXB 4U Rackmount 12 Module Capacity *Note replace “xxx” with 3 digit length of cable assembly. RACKMOUNT BRACKETS 19” MP1U3B 1 RU Bracket 3 Cassette Capacity MP1U3B-SS 1 RU Bracket 3 Cassette Capacity with Slack Storage RDC XXX X XX X X X FIBER PORTS FIBER TYPE ADAPTER PIGTAILS DENSITY SPLICE BAY 216 288 432 576 864 R = Singlemode K = MM62.5 OM1 C = MM50 OM2 S = MM50 OM3 T = MM50 OM4 LC = LC UPC LA = LC APC SC = SC UPC SA = SC APC 5 = 250um R = Ribbon S = Standard H = High B = Bottom M = Middle T = Top X = None
FIBER DISTRIBUTION HUBS (FDH SERIES) 23 www.tiitech.com FDH1/FDH2 SERIES FIBER DISTRIBUTION HUBS FDH Series wall mount fiber distribution hubs are designed to support patching, splicing and optical splitting in one unit. Enclosures have either 9 adapter panel positions (FDH1) or 13 adapter panel positions (FDH2) allowing for a wide variety of patching and splitting combinations. The central inner door separates the installed customer drops and feeder cable to allow easy technician access for ongoing customer maintenance; utilizing the PON splitters. FDH1 X X XX X X X X X DISTRIBUTION PORTS FIBER MODE ADAPTERS FEEDER LOADED FEEDER FIBER COUNT DISTRIBUTION LOADED SPLICE TRAYS 24SF/72MF SPLITTER TYPE SPLITTER QTY LOADED B = 12 F = 24 H = 36 J = 48 L = 72 N = 96 R = OS2 LC = LC UPC SA = SC APC A = PSC Single Fusion B = PSC Mass Fusion E = PSC No Pigtail M = MFM MPO P = Plate Adapters only 5 = 250um Pigtails* 9 = 900um Pigtails* R = Ribbon Pigtails* 0 = None 6 = 6 B = 12 A = PSC Single Fusion B = PSC Mass Fusion E = PSC No Pigtail M = MFM MPO P = Plate Adapters only 5 = 250um Pigtails* 9 = 900um Pigtails* R = Ribbon Pigtails* 0-5* 0 = None Q = Quad 1x8 D = Dual 1x16 3 = 1x32 0-4 Dimensions (height x width x depth): 15.7” x 15.0” x 9.2” (39.9 cm x 38.1 cm x 23.4 cm) FDH2 X X XX X X X X X DISTRIBUTION PORTS FIBER MODE ADAPTERS FEEDER LOADED FEEDER FIBER COUNT DISTRIBUTION LOADED SPLICE TRAYS 24SF/72MF SPLITTER TYPE SPLITTER QTY LOADED L = 72 N = 96 P = 144 S = 288 (LC only) R = OS2 LC = LC UPC SA = SC APC A = PSC Single Fusion B = PSC Mass Fusion E = PSC No Pigtail M = MFM MPO P = Plate Adapters only 5 = 250um Pigtails* 9 = 900um Pigtails* R = Ribbon Pigtails* 0 = None 6 = 6 B = 12 A = PSC Single Fusion B = PSC Mass Fusion E = PSC No Pigtail M = MFM MPO P = Plate Adapters only 5 = 250um Pigtails* 9 = 900um Pigtails* R = Ribbon Pigtails* 0-7* 0 = None Q = Quad 1x8 D = Dual 1x16 3 = 1x32 0-5 Dimensions (height x width x depth): 14.2” x 20.0” x 11.0” (36.1 cm x 44.7 cm x 23.4 cm) * Splice trays are only required for additional express cable splicing or legacy pigtail options 5/9/R Note: Other options and accessories are also available - please contact Tii customer service.
FIBER DISTIBUTION HUBS (FDH SERIES) 24 www.tiitech.com FDH5 X A X R XX X X X X X X X X XX Mounting Color Distrib. Ports Interface Feeder Fibers Feeder Cable Distrib. Cable Count Distrib.Cable Splice Trays Splitter Style Split Ratio Splitter Qty. Stub Length (M) P = Pole/Wall B = Pad 6” Skirt C = Pad 8” Skirt D = Pad 12” Skirt E = Pad 16” Skirt A = Almond L = 72 N = 96 P = 144 LC = LC/UPC SA = SC/APC B = 12 F = 24 N = None L = OSP LT Dielectric T = OSP LT Armored C = Flat Drop R = Ribbon OSP S = Ribbon OSP Armored 0 - 1 N = None L = OSP LT T = OSP LT Armored R = Ribbon OSP S = Ribbon OSP Armored 0 - 2 L = LPS (Default) 0 = None 2 = 1x16 3 = 1x32 0 - 5 00 -9 9 * Feeder or Distribution without a factory stub will include 250um Ribbon pigtails for single or mass fusion inside each cassette. Ribbon splicing may also be done in splice trays if so equipped (single fusion of distribution is not possible). FDH5/6/7/8/9 - FIBER DISTRIBUTION HUB SERIES MODULAR POLE/PAD MOUNT ENCLOSURES Fiber Distribution Hubs (FDH) are a weatherproof family of metal enclosures for outdoor use which can be pole, wall or pad mounted. The FDH is configured as a high density modular cassette PON solution for 288432 customer service drops. Flexible design and options support a wide range of deployment styles including fusion splicing, field termination and are backwards compatible to multiple suppliers’ PLC splitter modules. Dimensions (height x width x depth): 21.1”x 21.5”x 16.5”(53.59 cm x 53.59 cm x 41.91 cm)
FIBER DISTRIBUTION HUBS (FDH SERIES) 25 www.tiitech.com FDH6 X A X R SA X X X X X X X X XX Mounting Color Distrib. Ports Interface Feeder Fibers Feeder Cable Distrib. Cable Count Distrib. Cable Splice Trays Splitter Style Split Ratio Splitter Qty. Stub Length (M) P = Pole/Wall B = Pad 6” Skirt C = Pad 8” Skirt D = Pad 12” Skirt E = Pad 16” Skirt A = Almond L = 72 N = 96 P = 144 R = 216 S = 288 SA = SC/APC LC = LC/UPC B = 12 F = 24 H = 36 J = 48 N = None L = OSP LT Dielectric T = OSP LT Armored C = Flat Drop R = Ribbon OSP S = Ribbon OSP Armored 0 - 4 N = None L = OSP LT T = OSP LT Armored R = Ribbon OSP S = Ribbon OSP Armored 0 - 4 L = LPS (Default) 0 = None 3 = 1x32 0 - 9 00 - 99 * Feeder or Distribution without a factory stub will include 250um Ribbon pigtails for single or mass fusion inside each cassette. Ribbon splicing may also be done in splice trays if so equipped (single fusion of distribution is not possible). FDH6 Dimensions (height x width x depth): 27.0” x 21.5” x 16.5” (68.58 cm x 54.61 cm x 41.91cm LDR-BRK-18 Dimensions (height x width x depth): 16.0” x 18.75” x 22.0” (40.64 cm x 47.63 cm x 55.88 cm) LDR-BRK-21 Dimensions (height x width x depth): 16.0” x 18.75” x 25.0” (40.64 cm x 47.63 cm x 63.50 cm) LDR-BRK-24 Dimensions (height x width x depth): 16.0” x 18.75” x 28.0” (40.64 cm x 47.63 cm x 71.12 cm) FDH SERIES ACCESSORIES - LDR-BRK SERIES FIXED POLE MOUNTED LADDER BRACKET When working in pole mounted cabinets, Tii’s permanently mounted, fixed depth ladder brackets provide a stable platform to land an extension ladder against a pole, creating a safe foundation for a worker perform routine service functions. LDR-BRK-18 Fixed Pole Mounted Ladder Bracket, Fixed 18” Ladder Offset with Safety Belt Bracket, Almond LDR-BRK-21 Fixed Pole Mounted Ladder Bracket, Fixed 21” Ladder Offset with Safety Belt Bracket, Almond LDR-BRK-24 Fixed Pole Mounted Ladder Bracket, Fixed 24” Ladder Offset with Safety Belt Bracket, Almond
FIBER DISTIBUTION HUBS (FDH SERIES) 26 www.tiitech.com FDH SERIES ACCESSORIES - FDH SERIES POLE MOUNT KIT Compatible with FDH5, FDH6 and FDH7 Series Enclosures. Kit includes all hardware, pole mount bracket, and stabilizing bracket. FDH-PMT-KIT FDH Pole Mount Kit with Stabilizer Bar and Hardware FDH7 X A X R SA X X X X X X X X XX MOUNTING COLOR DISTRIB. PORTS INTERFACE FEEDER FIBERS FEEDER CABLE DISTRIB. CABLE COUNT DISTRIB. CABLE SPLICE TRAYS SPLITTER STYLE SPLIT RATIO SPLITTER QTY. STUB LENGTH (M) P = Pole/Wall B = Pad 6” Skirt C = Pad 8” Skirt A = Almond T = 432 SA = SC/APC LC = LC/UPC B = 12 F = 24 H = 36 J = 48 L = 72 N = None L = OSP LT Dielectric T = OSP LT Armored C = Flat Drop I = I/O LT Riser R = Ribbon OSP 0 - 6 N = None L = OSP LT T = OSP LT Armored I = I/O LT Riser R = Ribbon OSP 0 - 4 L = LPS (Default) 0 = None 3 = 1x32 0 - 9 A = 10 B = 11 to E = 14 00 - 99 * Feeder or Distribution without a factory stub will include 250um Ribbon pigtails for single or mass fusion inside each cassette. Ribbon splicing may also be done in splice trays if so equipped (single fusion of distribution is not possible). FDH7 Dimensions (height x width x depth): 38.5” x 21.5” x 16.5” (97.8 cm x 44.7 cm x 16.3 cm)
FIBER DISTRIBUTION HUBS (FET SERIES) 27 www.tiitech.com FET4H - XX X XX X X X Fiber Ports Fiber Type Adapters Pigtail Splitter Type Splitter Qty. 8 12 24 32 R = Singlemode K = MM62.5 OM1 S = MM50 OM3 NA = None SC = SC/UPC SA = SC/APC N = None 5 = 250um 9 = 900um R = Ribbon 0 = None 1 = 1x4 2 = 1x8 3 = 1x16 4 = 1x32 0-4 FET4S - XX X XX X X X Fiber Ports Fiber Type Adapters Pigtail Splitter Type Splitter Qty. 8 12 24 32 R = Singlemode K = MM62.5 OM1 S = MM50 OM3 NA = None SC = SC/UPC SA = SC/APC N = None 5 = 250um 9 = 900um R = Ribbon 0 = None 1 = 1x4 2 = 1x8 3 = 1x16 4 = 1x32 0-4 FET4 SERIES - 48F INDOOR/OUTDOOR FIBER DISTRIBUTION HUB The FET4 Indoor/outdoor Fiber Distribution Hub is a weatherproof unit designed for connectivity between OSP and customer fiber drops, ideally suited for outdoor pole or wall mount installations. The FET4 utilizes high density modular cassettes for patch and splice solutions for up to 48 customer service drops. A flexible design supports a wide range of deployment styles including fusion splicing and field termination. NEMA-4 rated. FET4 Dimensions (height x width x depth): 12.7” x 12.5” x 7.1” (32.3 cm x 31.8 cm x 18.0 cm) Custom configurations are available - please contact Tii customer service. FET4H USES LPS SPLITTERS (SEE PAGE 33) FET4S USES PLC9 SPLITTERS (SEE PAGE 32)
FIBER DISTIBUTION HUBS (FDH SERIES) 28 www.tiitech.com FDH8 X A X R XX X X X X X X X X XX Mounting Color Distrib. Ports Interface Feeder Fibers Feeder Cable Distrib. Cable Count Distrib. Cable Splice Trays Splitter Style Split Ratio Splitter Qty. Stub Length (M) B = Pad 6” Skirt C = Pad 8” Skirt A = Almond T = 432 U = 576 SA = SC/APC LC = LC/UPC B = 12 F = 24 J = 48 L = 72 N = 96 N = None L = OSP LT Dielectric T = OSP LT Armored C = Flat Drop R = Ribbon OSP S = Ribbon OSP Armored 0 - 4 N = None L = OSP LT T = OSP LT Armored R = Ribbon OSP S = Ribbon OSP Armored 0 - 4 L = LPS (Default) 0 = None 3 = 1x32 0 - 9 A = 10 B = 11 to I = 18 00 - 9 9 * Feeder or Distribution without a factory stub will include 250um Ribbon pigtails for single or mass fusion inside each cassette. Ribbon splicing may also be done in splice trays if so equipped (single fusion of distribution is not possible). FDH8 Dimensions (height x width x depth): 36.0” x 34.5” x 16.5” (91.44 cm x 87.63 cm x 41.91 cm) FDH9 X A X R XX X X X X X X X X XX Mounting Color Distrib. Ports Interface Feeder Fibers Feeder Cable Distrib. Cable Count Distrib.Cable Splice Trays Splitter Style Split Ratio Splitter Qty. Stub Length (M) B = Pad 6” Skirt C = Pad 8” Skirt A = Almond T = 432 U = 576 V = 720 W = 864 SA = SC/APC LC = LC/UPC B = 12 F = 24 J = 48 L = 72 N = 96 P = 144 N = None L = OSP LT Dielectric T = OSP LT Armored C = Flat Drop R = Ribbon OSP S = Ribbon OSP Armored 0 - 4 N = None L = OSP LT T = OSP LT Armored R = Ribbon OSP S = Ribbon OSP Armored 0 - 4 L = LPS (Default) 0 = None 3 = 1x32 6 = 1x64 0 - 9 A = 10 B = 11 to S = 28 00 - 9 9 * Feeder or Distribution without a factory stub will include 250um Ribbon pigtails for single or mass fusion inside each cassette. Ribbon splicing may also be done in splice trays if so equipped (single fusion of distribution is not possible). FDH9 Dimensions (height x width x depth): 36” x 42.3” x 19.8” (91.44 cm x 107.44 cm x 50.29 cm)
FIBER DISTIBUTION HUBS (HCCH SERIES) 29 www.tiitech.com HCCH SERIES MODULAR FIBER DISTRIBUTION HUB (FDH) ENCLOSURE Hybrid Connectivity Closure is a weatherproof family of plastic enclosures for indoor and outdoor use that can be wall or pole mounted. The HCCH is configured as a high density modular cassette FDH PON solution for up to 144 customer service drops. Flexible design and options support a wide range of deployment styles including fusion splicing, field termination, and backwards compatible to multiple suppliers PLC splitter modules. ORDERING INFORMATION - BASE MODEL HCCH3 HCC FDH Bottom Entry NEMA 3 for Indoor Use Rubber and Split Grommets HCCH4 HCC FDH Bottom Entry NEMA 4 for Indoor and Outdoor Use Conduit Dimensions (height x width x depth): 16.2” x 17.2” x 8.2” (41.15 cm x 43.69 cm x 52.91 cm) PON SPLITTERS MODEL NO. STYLE SPLIT RATIO DESCRIPTION LPS04080SA51 Mini PLC Quad 1:8 LPS Mini Splitter Module Quad 1:8 SC-APC 51" LPS02160SA51 Mini PLC Dual 1:16 LPS Mini Splitter Module Dual 1:16 SC-APC 51" LPS01320SA51 Mini PLC 1:32 LPS Mini Splitter Module 1:32 SC-APC 51" CASSETTES AND ADAPTER PLATES HPC-12RSAR Patch & Splice Cassette 12 Fiber SC-APC Ribbon HPC-12RSA9 Patch & Splice Cassette 12 Fiber SC-APC 900um HPC-12RSAN Patch Cassette 12 SC-APC Adapters only (no pigtails) HPP-12RSAN Adapter Plate 12 SC-APC (no pigtails) HCCH X X X R SA X X X X X L X X XX Series Cable Ports Mounting Style Distrib. Ports Fiber Type Adapter Type Feeder Fibers Feeder Style Distr. Cable Count Distr. Style Splice Trays 24SF/72MF Splitter Style Split Ratio Splitter Qty. Stub Length 3 = Bottom Standard (NEMA 3) 4 = Bottom Conduit (NEMA 4) W = Wall P = Pole or Wall F = 24 H = 36 J = 48 L = 72 N = 96 P = 144 R = G.657A1 LC = LC-UPC SA = SC-APC B = 12 F = 24* A = Single Fusion B = Mass Fusion M = MPO E = Empty Cassette P = Plate Adapters only Cable Stubs: I = I/O LT Riser C = OSP Flat Drop Diel L = OSP LT Dielectric T = OSP LT Armored R = OSP Ribbon Dielectric S = OSP Ribbon Armored 0-2 A = Single Fusion B = Mass Fusion M = MPO E = Empty Cassette P = Plate Adapters only Cable Stubs: I = I/O LT Riser L = OSP LT Dielectric T = OSP LT Armored R = OSP Ribbon Dielectric S = OSP Ribbon Armored 0-2** L = LPS 0 = None 1 = Quad 1x8 2 = Dual 1x16 3 = 1x32 0-5 00 = None 10-99 Meter Stub * 24 Feeder will reduce distribution by one cassette ** Feeder and distributor splicing is done inside cassettes, these trays are for express tables Note: Other options and accessories are also available - please contact Tii customer service.
FIBER CROSS-CONNECT CABINETS (FD SERIES) 30 www.tiitech.com FDX7 X A X R SA X X X X X X XX Mount Color Ports Interface Feeder Cable # Feeder Cable Feeder Install Distrib Cable # Distrib Cable Distrib Install Stub Length (M) P = Pole A = Pad 4” Skirt C = Pad 8” Skirt A = Almond S = 288/288* SA = SC/APC 0-4 N = None L = OSP LT Dieletric T = OSP LT Armored R = OSP Ribbon N = None T = Top B = Bottom 0-4 N = None L = OSP LT Dieletric T = OSP LT Armored R = OSP Ribbon N = None T = Top B = Bottom 0-99 Dimensions (height x width x depth): 42.5”x 21.5”x 16.5”(107.9 cm x 54.6 cm x 41.9 cm) FDX5 X A X R SA X X X X X X XX Mount Color Ports Interface Feeder Cable # Feeder Cable Feeder Install Distrib Cable # Distrib Cable Distrib Install Stub Length (M) P = Pole B = Pad 6” Skirt C = Pad 8” Skirt A = Almond L = 72/72 N = 96/96 P = 144/144 SA = SC/APC 0-4 N = None L = OSP LT Dieletric T = OSP LT Armored R = OSP Ribbon N = None T = Top B = Bottom 0-4 N = None L = OSP LT Dieletric T = OSP LT Armored R = OSP Ribbon N = None T = Top B = Bottom 0-99 Dimensions (height x width x depth): 22.1”x 21.5”x 16.5”(56.1 cm x 54.6 cm x 41.9 cm) *Additional port counts available - please contact Tii customer service.
flippingbook.comRkJQdWJsaXNoZXIy MTM4MzQ3Mw==