FTTH Fiber To The Home Ordering Guide
www.tiitech.com www.tiitech.com OUTDOOR FIBER INTERFACE DEVICES/ SLACK STORAGE UNITS Fiber Interface Device/Slack Storage Transition Enclosures provide a point of connection between the OSP fiber drop and customer fiber drop. Tii Transition Enclosures are offered in a variety of sizes to meet your installation and placement requirements. Available with slack storage and accommodations for up to 16 fiber terminations. 6.11” x 4.33” x 2.57” 169F -XX -XX Adapter Type No. of Fiber Ports 01 = SC-APC 02 = SC-UPC 01 = 1 02 = 2 03 = 4 171F -XX -X -X -X -X -XX * Adapter Mounting Options Middle Plate for Power Connections Ground Stud Split Ratio Splitter Qty. OEM 00 = No FP Plate, No Adapters 01 = FP Plate, No Adapters U1 = One SC UPC Adapter on FP01 Plate U2 = Two SC UPC Adapters on FP01 Plate A1 = One SC APC Adapter on FP01 Plate A2 = Two SC APC Adapters on FP01 Plate A8 = Eight SC APC Adapters on FP03 Plate 0 = None 1 = Middle Plate 0 = None 1 = Ground Stud 0 = None 1 = 1x8 4 = 1x4 0-2 Contact Sales 508F -XX -XX -XX -X X Adapter Plate Adapter Type # of Adapters Configuration Options Grommets (Optional) 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 03 = 1.5” Fiber Storage Tray 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 03 = 3 04 = 4 06 = 6 12 = 12 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed Blank = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet 508F-GRM-KIT Grommets for 508F (2 ea.) 508F-CON-GRM-KIT Grommets for 508F 1” Conduit Entry (2 ea.) 12.54” x 8.39” x 3.19” 169F Series 171F Series 508F Series 6.67” x 6.56” x 2.87” 8.1” x 5.6” x 2.6” 505F -XX -XX -XX -X X Adapter Mounting Options Adapter Type # of Ports Configuration Options Grommets (Optional) 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 04 = 4 06 = 6 12 = 12 24 = 24 (LC only) N = None E = External Ground None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet (1/2”) P = 1 Conduit Grommet (1/2”), 1 Compression Grommet 505F Series
OUTDOOR OPTICAL NETWORK TERMINAL ENCLOSURE Houses the components of a typical FTTH installation. Designed to mount to a wall, or directly on optional slack storage enclosure which accommodates up to 75 feet of fiber. 11.80” x 13.26” x 2.73” 13.50” x 11.56” x 3.37” Private labeling available for all enclosures OD-ONT-SSENC shown with OSP drop cable, Hardened Fiber Connector to SC Adapter and FP-01-01-01 Fiber Adapter Plate (not included) OD-ONT-ENC Outdoor Optical Network Terminal Enclosure OD-ONT-SSENC Outdoor Optical Network Terminal Slack Storage Enclosure – no cover OD-ONT-SSC Cover for OD-ONT-SSENC Optional Cover - OD-ONT-SSC FIBER ADAPTER PLATE SERIES The FP01, FP02 & FP04 Series are single, 6 port and 12 port fiber adapter plates that attach into Tii’s 169F, 171F, 506F, 507F, 508F, 509F and OD-ONT-ENC Series Fiber Enclosures. The fiber plate functions as a patch point for the incoming fiber drop and distribution out to the customer. FP XX -XX -XX Series Adapter Type Number of Ports 01 = Single Port 02 = 6 Port 04 = 12 Port 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 02 = 2 04 = 4 06 = 6 (FP02 series only) 12 = 12 (FP04 series SC only) 12 = 24 (FP04 series LC only) FP01 Dimensions: 4.23” x 3.60” x 1.50” FP02 Dimensions: 2.01” x 3.58” x 1.71” FP04 Dimensions: 2.42” x 3.63” x 2.01” FP01 FP02 ACCESSORIES 506F-GRM-KIT Grommets for 506F Standard Grommet (2 ea.) 506F-CMP-GRM-KIT Grommets for 506F 1/2” Compression Entry (2 ea.) 506F-CON-GRM-KIT1/2 Grommets for 506F 1/2” Conduit Entry (2 ea.) 506F-CON-GRM-KIT3/4 Grommets for 506F 3/4” Conduit Entry (2 ea.) FP2G-06RSAN00* 6 Port Patch & Splice Base SC/APC Adapters used in 506F Series Enclosures FP2R-K9-01-01-100-1 Fiber Spooling System with 100’ of Flat Bend Insensitive MicroDrop Cable for use with 506F FP2R-K9-01-01-100-01 FP2G-06RSAN00 *Please contact customer service for additional port count configurations
For Outdoor Transitions 11.94” x 13.50” x 3.19” 11.80” x 13.26” x 3.01” 10.35” x 9.94” x 2.90” 10.35” x 9.94” x 2.90” 506F Series 509F Series 509R Series 506R Series OUTDOOR FIBER INTERFACE DEVICES/SLACK STORAGE UNITS Private labeling available for all enclosures
www.tiitech.com 506R -XX -XX -XX -XXX -X X -XX Cable Type Adapter Type Adapter Qty Length in FT Configuration Options Grommets (Optional) Optional Pre-Peel K9 = MicroDrop 01 = SC-APC 02 = SC-UPC 01 = 1 025 050 075 100 125 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed Blank = 2 Standard Grommets C = (2) 1/2” Conduit Grommets G = 1 Standard Grommet, (1) 1/2” Conduit Grommet Blank = No Pre-Peel, No Pull Sock PE = No Pre-Peel, with Pull Sock 01 = ¼” of Peel Exposed with No Pull Sock 02 = ¼” of Peel Exposed with Pull Sock FP01-01-01 Fiber Adapter Plate Slack Ring with SC-APC Adapter 506F-GRM-KIT Grommets for 506F Standard Grommet (2 ea.) 506F-CMP-GRM-KIT Grommets for 506F 1/2” Compression Entry (2 ea.) 506F-CON-GRM-KIT1/2 Grommets for 506F 1/2” Conduit Entry (2 ea.) 506F-CON-GRM-KIT3/4 Grommets for 506F 3/4” Conduit Entry (2 ea.) 506F-OC Hardened Fiber Connector Mounting Collar with Rubber Boot BKT-506F-OT Mounting Bracket, Hardened Fiber Connector Compatible Adapter (not included) 509R-GRM-KIT Grommets for 509R Standard Grommet (2 ea.) 509R-CMP-GRM-KIT1/2 Grommets for 509R 1/2” Compression Entry (2 ea.) 509R-CON-GRM-KIT1/2 Grommets for 509R 1/2” Conduit Entry (2 ea.) 509F -XX -XX -XX Adapter Mounting Options Adapter Type # of Ports 00 = No Plate 01 = Fiber Plate (1, 2, or 4 adapters only) 00 = None 01 = SC-APC 02 = SC-UPC 00 = 0 01 = 1 02 = 2 04 = 4 506F & 506R ACCESSORIES 509R ACCESSORIES 506F -XX -XX -XX -X X Adapter Mounting Options Adapter Type # of Ports Configuration Options Grommets (Optional) 01 = Fiber Plate (1, 2, or 4 adapters only) 02 = Fiber Plate (6 Adapters) 04 = Fiber Plate (12 Adapters) 01 = SC/APC 02 = SC/UPC 03 = LC/APC 04 = LC/UPC 01 = 1 02 = 2 04 = 4 06 = 6 12 = 12 24 = 24 (LC only) N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed None = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommet (1/2”) P = 1 Conduit Grommet (1/2”), 1 Compression Grommet 509R -XX -XX -XX -XXX -X X -XX Cable Type Adapter Type Adapter Qty Length in FT Configuration Options Grommets (Optional) Optional Pre-Peel K9 = MicroDrop 01 = SC-APC 02 = SC-UPC 01 = 1 02 = 2 025 050 075 100 125 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed None = 4 Standard Grommets C = 2 Conduit Grommets, 2 Standard Grommets (Pos. B-D) G = 3 Standard Grommets, 1 Conduit Grommet, 1/2” (Pos. B) P = 2 Standard Grommets, 1 Conduit Grommet, 1/2” (Pos. B), 1 Compression Grommet, 1/2” (Pos. D) Blank = No Pre-Peel, No Pull Sock PE = No Pre-Peel, with Pull Sock 01 = ¼” of Peel Exposed with No Pull Sock 02 = ¼” of Peel Exposed with Pull Sock Private labeling available for all enclosures
For Outdoor to Indoor Transitions Z1K9R Series SC-A (Shrouds rem Indoor/Outdoor Jacket Removable Pullsock Available SC-APC 900um Clear Peels Easily Without Tools SC-APC (Shrouds removed to speed installation) Indoor/Outdoor Jacket Removable Pullsock Available SC-APC 900um Clear Peels Easily Without Tools FTTH Install Kits Please call for ordering information Exterior Transitions: 1. Transition Enclosure/NID 2. Customer Fiber Drop 3. Exterior Install Kit Accessories a. Riser Tube Kit (RTK) b. Wall Sleeve and Cap c. Fiber Clips Interior Transitions: 1. Wall Jack / Customer Connection Point (CCP) 2. Interior Install Kit Accessories a. Fiber Pathway b. Fiber Corners / Control Bend Radius c. Wall Sleeve and Cap
www.tiitech.com FPS-S-32 Fiber Pathway Strip 32” FPS-C-32 Fiber Pathway Cover 32” FPS-EC90 Fiber Pathway Elevated Corner 90 Degree Radius Control FPS-FC90 Fiber Pathway Flat Corner 90 Degree Radius Control FPT-01 Fiber Pathway Installation Tool OCWS Wall Sleeve with Universal Cap (White) OCWS-B Wall Sleeve with Universal Cap (Black) FRB-Z1K9R8-610M Pull Box Single-Fiber Peelable MicroDrop Cable 2000 ft. (610M) OCWS MicroDrop Cable Wall Sleeve with Universal Cap (White) OCWS-B MicroDrop Cable Wall Sleeve with Universal Cap (Black) HW-CLIP-01 Clear Vinyl Siding Clip for Single and Dual Peelable MicroDrop Cable HW-CLIP-02 White Screw Type Siding Clip for Peelable MicroDrop Cable HW-CLIP-03 Black Screw Type Siding Clip for Peelable MicroDrop Cable MICRODROP CABLE & ACCESSORIES Tii’s MicroDrop cable is an indoor/outdoor rugged fiber optic service cable. When transitioning from outside to an inside living or work space, the outer jacket is easily removed to expose a clear 900uM subunit that is almost invisible when routing indoors. Perfect transition cable from an outdoor FTTH transition enclosure to the customer ONT connection point providing the best signal quality with least visual impact to the premise. FIBER PATHWAY SYSTEM & ACCESSORIES Tii’s Fiber Pathway System (FPS) provides aesthetically pleasing fiber protection for routing 900um fiber within indoor residential or office applications. Featuring a high bonding adhesive backing material with an easy-peel liner, installation is as simple as peel and stick. When used in conjunction with Tii’s Peelable MicroDrop products, the FPS provides a labor and time optimized solution for bringing fiber drop into the living unit, connecting to a fiber jack or directly to the ONT. Z1K9R8- SA XX XXX X -XX Connector A Connector B Length UOM Optional Pre-Peel SA = SC-APC NA = None SA = SC-APC 3 Digit, e.g. 001 F = Feet M = Meters Blank = No Pre-Peel, No Pull Sock PE = No Pre-Peel, with Pull Sock 01 = ¼” of Peel Exposed with No Pull Sock 02 = ¼” of Peel Exposed with Pull Sock Z1K9R8-SASA025F-02 MicroDrop OFNR Peelable SC-APC/SC-APC 25 ft. Z1K9R8-SASA050F-02 MicroDrop OFNR Peelable SC-APC/SC-APC 50 ft. Z1K9R8-SASA075F-02 MicroDrop OFNR Peelable SC-APC/SC-APC 75 ft. Z1K9R8-SASA100F-02 MicroDrop OFNR Peelable SC-APC/SC-APC 100 ft. Please contact Tii Customer Service for units without break-out to remove outer jacket enlarged to show detail
www.tiitech.com CCP SERIES - CUSTOMER CONNECTION POINT WALL TERMINALS/PLATES Compact, indoor wall mount fiber termination and distribution terminals typically used in FTTD, FTTH and MDU ONT access points. Internal safety shutters are included on most CCP Series Wall Terminals. For Indoor Transitions CCPW1 CCP7 Series CCP6 Series CCP5 Series CCP1 Series CCP3 Series CCP2 Series 3.9“ H x 3.3“ W x 0.8“ D 4.52“ H x 2.78“ W x 0.81“ D 4.5” H x 2.75”W x 0.84” D 4.5” H x 3.3”W x 0.80” D 4.52“ H x 2.78“ W x 1.27“ D 3.0“ H x 5.8“ W x 0.6“ D 6.16“ H x 3.71“ W x 1.10“ D Private labeling available for all enclosures
www.tiitech.com www.tiitech.com CCP1R1SAN 1 Port Wall Terminal SC-APC CCP1R2SA9 2 Port Patch & Splice Panel SM SC-APC 900UM Pigtails CCP1R1SA9 1 Port Patch & Splice Panel SM SC-APC 900UM Pigtail CCP1R2SCN 2 Port Wall Terminal SC CCP1R1SCN 1 Port Wall Terminal SC CCP1R2SC9 2 Port Patch & Splice Panel SM SC-UPC 900UM Pigtails CCP1R1SC9 1 Port Patch & Splice Panel SM SC-UPC 900UM Pigtail CCP1R2LCN 2 Port Wall Terminal LC CCP1R2SAN 2 Port Wall Terminal SC-APC CCP1R2LC9 2 Port Patch & Splice Panel SM LC-UPC 900UM Pigtails CCP2R1SAN 1 Port Wall Terminal SC-APC CCP2R1SC9 1 Port Patch & Splice Panel SM SC-UPC 900UM Pigtail CCP2R1SA9 1 Port Patch & Splice Panel SM SC-APC 900UM Pigtail CCP2R2LCN 2 Port Wall Terminal LC CCP2R1SCN 1 Port Wall Terminal SC CCP2R2LC9 2 Port Patch & Splice Panel SM LC-UPC 900UM Pigtails CCP3R1SAN 1 Port Wall Terminal SC-APC CCP3R2SAN 2 Port Wall Terminal SC-APC CCP3R1SA9 1 Port Patch & Splice Panel SM SC-APC 900UM Pigtail CCP3R2SA9 2 Port Patch & Splice Panel SM SC-APC 900UM Pigtails CCP3R1SCN 1 Port Wall Terminal SC CCP3R2SCN 2 Port Wall Terminal SC CCP3R1SC9 1 Port Patch & Splice Panel SM SC-UPC 900UM Pigtail CCP3R2SC9 2 Port Patch & Splice Panel SM SC-UPC 900UM Pigtails CCP5R1SSNP 1 Port SC-APC Wall Terminal with Internal Shutter and Wallplate CCP5R1SAN 1 Port SC-APC Wall Terminal CCP5R1SANP 1 Port SC-APC Wall Terminal with Wallplate CCP5-WP CCP5 Wall Plate CCP5 X X XX N X Fiber Type Fiber Ports Adapter Loading R = Single Mode 1 = 1 Port SS = Adapter with Internal Shutter SA = Adapter without Internal Shutter P = Wall Plate CCP6R1SSNK 1 Port SC-APC Wall Terminal with Internal Shutter and Additional Auxiliary Keystone Port CCP6R1SANK 1 Port SC-APC Wall Terminal with Additional Auxiliary Keystone Port CCP7-ONT 1 Port SC-APC Fiber Jack with Shutter, Includes Base and ONT Mount Plate CCP7-BCVR 1 Port SC-APC Fiber Jack with Shutter, Includes Base and Streamlined Cover CCP7R1LCN 2 Port LC-UPC Fiber Jack, Includes Base and Streamlined Cover CCP7-CVR Streamlined Cover Plate CCPW1 Wallplate with SC-APC Adapter and Internal Safety Shutter CCP1 SERIES CCP2 SERIES CCP3 SERIES CCP5 SERIES CCP6 SERIES CCP7 SERIES CCW1 SERIES
INDOOR OPTICAL NETWORK TERMINAL ENCLOSURE Indoor enclosure designed to hold the components of a typical FTTH installation. Designed to mount to a wall or on an optional slack storage enclosure that can accommodate greater than 50’ of flat drop fiber. ONT-ENC-LA ONT Enclosure - Light Almond ONT-SSENC-LA Optical Network Terminal Slack Storage Tray for ONT-ENC - Light Almond 15.12” x 14.12” x 3.52” 14.13” x 13.13” x 1.86” For Indoor Transitions Private labeling available for all enclosures
www.tiitech.com Available in 15”, 30” and 45” lengths, Tii’s Flush Mount Closures provide an ideal solution to centrally locate equipment used to deliver voice, data, video, audio or wireless services at the premise. Manufactured from high performance engineering thermoplastic the FMC Series will not impede RF signals where wireless networks are deployed. Provides ease of installation and efficient organization of ONTs, battery back-up and residential gateways. Modular design and rear mounting pattern give a wide latitude for hardware locations with ample ventilation to keep equipment cool. 180 degree hinged cover allows for quick and easy access to network equipment which can be mounted in multiple locations by means of Velcro straps, shelving support clips and other cable management components. STRUCTURED WIRE FLUSH MOUNT CLOSURES OTHER CONFIGURATIONS AND ACCESSORY OPTIONS ARE AVAILABLE - PLEASE CONTACT TII CUSTOMER SERVICE FMC-15 15 inch enclosure, base and cover - (1) Gang Box Plate, (3) Conduit Plates, (4) #8 x ¾” lg. flat head screws, (4) #8 x 2” pan head screws, (4) #6 x ¼” lg. pan head self-tapping screws and paint shield (FMC-15B + FMC-15C) FMC-15B 15" Base with (4) #8 X 3/4" Self-Tapping Pan Head Phillips Zinc Plated Screws, (4) #6 X 1/4" Self-Tapping Combination Head Zinc Plated Screws and Paint Shield FMC-15C 15" Cover - with (4) #8 X 2" Self-Tapping Pan Head Phillips Zinc Plated Screws FMC-30 30 inch enclosure, base and cover - (1) Gang Box Plate, (3) Conduit Plates, (4) #8 x ¾” lg. flat head screws, (8) #8 x 2” pan head screws, (4) #6 x ¼” lg. pan head self-tapping screws and paint shield (FMC-30B + FMC-30C) FMC-30B 30" Base Only with (4) #8 X 3/4" Self-Tapping Pan Head Phillips Zinc Plated Screws, (4) #6 X 1/4" Self-Tapping Combination Head Zinc Plated Screws and Paint Shield FMC-30B-EL FMC-30 Base + Electrical Kit FMC-30C 30" Cover with (8) #8 X 2" Self-Tapping Pan Head Phillips Zinc Plated Screws FMC-30C-EXT FMC-30 Cover + 1.25" Extender 30 FMC-30-EL FMC-30 + Electrical Kit FMC-30-EXT FMC-30 + 1.25” Extender 30 FMC-30-EXT-EL FMC-30 + 1.25" Extender 30 + Electrical Kit FMC-EXT-30 1.25” Depth Extender for FMC-30 FMC-45 45 inch enclosure, base and cover - (2) Gang Box Plates, (2) Conduit Plates, (4) #8 x ¾” lg. flat head screws, (12) #8 x 2” pan head screws, (4) #6 x ¼” lg. pan head self-tapping screws and paint shield (FMC-45B + FMC-45C) FMC-45B 45" Base with (4) #8 X 3/4" Self-Tapping Pan Head Phillips Zinc Plated Screws, (4) #6 X 1/4" Self-Tapping Combination Head Zinc Plated Screws and Paint Shield FMC-45B-EL FMC-45 Base + Electrical Kit FMC-45C 45" Cover with (8) #8 X 2" Self-Tapping Pan Head Phillips Zinc Plated Screws FMC-45C-EXT FMC-45 Cover + 1.25" Extender 45 FMC-45-EL FMC-45 + Electrical Kit FMC-45-EXT FMC-45 + 1.25” Extender 45 FMC-45-EXT-EL FMC-45 + 1.25" Extender 45 + Electrical Kit FMC-EXT-45 1.25” Depth Extender for FMC-45 FMC-A1 Accessory Kit: (1) #10-32 x 1.160 Ground Stud, (3) Nuts, (6) Washer, (6) Mini-shelves, (10) Velcro/wire tie clips, (26) #8 x 3/8” self-tapping pan head screws, (5ft) ½ inch Velcro FMC-DIV Divider for 30 and 45 Inch Enclosures Allowing for Separate Lockable Compartments FMC-EL Electrical Kit; (White 15 Amp Duplex AC Outlet, Galvanized Steel Gang Box, White Duplex Faceplate) FMC-LK Lock Kit: Cam Lock FMC-MP Door Mounting Plate Kit FMC-PLT-1 Gang Box Plate FMC-PLT-2 Conduit Plate FMC-RGSHELF Accessory Kit: (1) 8.17” x 4.18” Shelf, (2) Velcro Tie Clips, (22”) ½ Inch Velcro, Mounting Screws
© 2026 Tii Technologies Inc. All rights reserved. MKT-BRO-FTTH 2026 Update » Over 60 Year Industry Leader » World Class Manufacturing Infrastructure » State-of-the-art Technology » Global Distribution Network Tii Technologies Inc. Corporate Headquarters: 141 Rodeo Drive Edgewood, NY 11717 Phone: 631.789.5000 Toll Free: 888.844.4720 sales@tiitech.com www.tiitech.com INFORMATION CONTAINED IN THIS PUBLICATION IS PROVIDED ONLY FOR YOUR CONVENIENCE AND IS SUBJECT TO CHANGE WITHOUT NOTICE. TII TECHNOLOGIES MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE; AND TII TECHNOLOGIES DISCLAIMS ALL LIABILITY ARISING FROM THE USE OF THIS INFORMATION.
tiitech.comRkJQdWJsaXNoZXIy MTM4MzQ3Mw==