tii


 

Wire Terminals


Tii's wire terminal connectivity solutions for broadband-enabled services and network management are designed for easy installation, minimum maintenance, and maximum protection. Our gel-sealed IDC termination can reduce installation time and increase reliability, which means decreased costs and increased customer satisfaction.

68M-2-2T - Dual-Line Sealed Wire Terminal with Two Stubs

The 68M-2-2T Sealed Wire Terminal is designed for applications requiring more than one parallel connection (extension) to a dual pair service.

AdobePDF.jpg read more (PDF)

69M-2S - Sealed Wire Terminal with Home Security Connections

The 69M-2S is designed for applications requiring more than one parallel connection to a single pair service. This product is an ideal fit for Voice Over Internet Protocol (VoIP) networks.

AdobePDF.jpg read more (PDF)

67M Series - Sealed Wire Terminal

The 67M Series Sealed Wire Terminal is designed for applications requiring more than one parallel connection to a single tip-ring pair.

AdobePDF.jpg read more (PDF)

68M Series - Sealed Wire Terminal

The 68M Series Sealed Wire Terminal is designed for applications requiring more than one parallel connection (extension) to single or two pair service.

AdobePDF.jpg read more (PDF)

68M-2S - Sealed Wire Terminal with Home Security Connections

The 68M-2S is designed for applications requiring more than one parallel connection to a single service in addition to providing connectivity to an existing Home Security System. This product is an ideal fit for digital voice networks connected to a home security system.

AdobePDF.jpg read more (PDF)

68M-2S-4 - Two Line Sealed Wire Terminal with Home Security Connections

The 68M-2S-4 is designed for applications requiring more than one parallel connection for two pair service, in addition to providing connectivity to a Home Security System.

AdobePDF.jpg read more (PDF)

69M Series - Sealed Wire Terminal

The 69M Series Sealed Wire Terminal is designed for applications requiring more than one parallel connection (extension) to a single or two pair service. This product is an ideal fit for Voice Over Internet Protocol (VoIP) networks.

AdobePDF.jpg read more (PDF)

170 Series - Outdoor Sealed Wire Terminal Enclosure

170 Series Outdoor Sealed Wire Terminal Enclosures are versatile outdoor housings, designed and tested to the industry's most stringent environmental standards. The 170 is specifically designed to accommodate two separate 68 Series or SVM Series modules in the upper or lower positions of the enclosure. Featuring snap-in retaining tabs, this flexible design offers the customer the ability to order the 170 in multiple configurations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

168 Series - Outdoor Sealed Wire Terminal Enclosure

The 168 Series Outdoor Sealed Wire Terminal Enclosure accommodates the Tii 68 Series Sealed Wire Terminal. The 68 Series is designed for applications requiring more than one parallel connection to a single or two pair service. This product is an ideal fit for digital voice networks.

AdobePDF.jpg read more (PDF)

162T Series - Outdoor Sealed Wire Terminal Enclosure

The 162T Series Outdoor Sealed Wire Terminal Enclosure accommodates the 69T Series Sealed Wire Terminal. The 69T Series is designed for applications requiring more than one parallel connection to a single or two pair service. This product is an ideal fit for Voice Over Internet Protocol (VoIP) networks.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

MST - Modular Splice Terminal

The MST Series is a modular aerial terminal designed for 5 or 10 pair applications. The MST utilizes Tii's gel-sealed IDC technology for the easiest wire termination in the industry. The unit is constructed of a high density polyethylene to protect splices from UV degredation and harsh environments.

AdobePDF.jpg read more (PDF)

751B - Surface Mount Gel-Sealed Telephone Jack

The 751B is a single line, indoor gel-sealed unit ideally suited for indoor telephone connections or demarcation applications. This unit is compact and may be mounted to any suitable flat surface.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WTB-025-C04 - 25 Line Sealed Wire Terminal with 4FT CAT3 Cable Stub

The WTB-025-C04 Sealed Wire Terminal is designed for applications requiring 25 pair output with 24awg cable.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

68M-12-C04 - Twelve Line Sealed Wire Terminal with 4ft. Cat3 Cable Stub

The 68M-12-C04 Sealed Wire Terminal is designed for applications requiring 12 pair output with 24awg cable.

AdobePDF.jpg read more (PDF)

62 Series - Category 5e Termination Block

62 Series Category 5e Termination Blocks are designed to accept cable pairs without having to pre-terminate an RJ-11. Converts cable pairs to an RJ-11 male plug end without the need for special tooling. Ideal for Fiber to the home (FTTH) ONT applications.

AdobePDF.jpg read more (PDF)

65-10 - 10 Pair IDC Connector Block

Based on the gel and IDC technologies that have made Tii sealed connections the industry standard in Network interface products, with over 400 Million rockers in service around the world, the 10 PAIR IDC block adds a new level of simplicity and efficiency to cross-connect functions. Tool less Gel sealed IDC's terminate and lock 26-22 AWG conductors and seals the connection against corrosion. The Tii block uses existing Krone type test tools thereby eliminating the need to re-equip the workforce.

AdobePDF.jpg read more (PDF)

DVC-4 - Four Line Digital Voice Connector

DVC-4, four line digital voice connector distributes EMTA connections to customers telephone lines through sealed IDC rocker assemblies.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

AIC-400-33 | AIC-600-29 - Aerial In-Line Splice Closure

The AIC Closure is a single piece aerial closure easily installed in construction or maintenance situations. The one piece construction permits complete splice access after placement without removal of the closure or bonding from the cables. The closures are free breathing and suitable for straight, butt and branch splices of non-pressurized communication cables. Splices are protected by the closure's double-wall molded polyethylene construction. When properly installed, the durable closure will not crack or break even in harsh environments. All components are attached to the closure so there are no parts to lose.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

605-5 - Twenty-Five Pair Aerial Terminal

Twenty-Five Pair Aerial Terminal - Gel-Sealed Tool-less Rocker - IDC Terminations - Easiest Connection in the Marketplace. ADX-5T Gel-Sealed IDC Terminal Blocks

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

605-50 - Fifty Pair Aerial Terminal

Fifty Pair Aerial Terminal with Gel-Sealed Tool-less Rocker - IDC Terminations - Easiest Connection in the Marketplace. ADX-5T Gel-Sealed IDC Terminal Blocks

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

761T Series - Flush Mount Indoor Phone Jack Plate

The 761T Series flush mount indoor phone jack plate is designed to provide convenient RJ11 connectivity with IDC termination in the back and utilizes Tii's proprietary gel filled IDC rockers for wire terninations. The IDC rockers are color coded for tip and ring wire orientations. Termination of wires is easy as the wires do not need stripping. All one needs is to lift the rocker, straighten ends of the wire, insert and pull the rockers in fully down posistion.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

163 Series - Wire Terminal Enclosures

163 Series Wire Terminal Enclosures are used to connect drop wire and bridle wire for aerial wire drops.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

166 Series - Wire Terminal Enclosures

166 Series Wire Terminal Enclosures are used to connect drop wire and bridle wire to cable or open wire.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

ADX-FL-W - Sealed Cross-Connect Fuse Link Module

Tii's Angle Driver ADX-FL-W Cross-Connect Fuse Link Module provides a convenient fuse link with sealed IDC terminations in a standard 355/356 station protector footprint.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)
AdobePDF.jpg Installation Notes (2) (PDF)

ADX-W - Sealed Unprotected Cross-Connect Module

Tii's Angle Driver ADX-W Cross-Connect Module provides a convenient cross-connect function with sealed IDC terminations in a standard 355/356 station protector footprint.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

61 Series - CAT5E Termination Block

The 61 Series Category 5e Termination Block is designed to accept Ethernet cable pairs without having to pre-terminate an RJ-45 or RJ-11. Converts cable pairs to RJ-45 or RJ-11 male plug end without the need for special tooling. Ideal for Fiber to the home (FTTH) ONT applications.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

67-2-18 - Sealed Wire Terminal

The 67-2-18 Sealed Wire Terminal is designed to replace standard type 103 binding post terminals, typically found in aerial splice closures.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

68M-1-1T - Single Line Sealed WIre Terminal with RJ-11 Tail/Connector

The 68M-1-1T Sealed Wire Terminal is designed for applications requiring more than one parallel connection (extension) to a single or two pair service.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

68M-2-1T - Two Line Sealed Wire Terminal with RJ-11 Tail/Connector

The 68M-2-1T Sealed Wire Terminal is designed for applications requiring more than one parallel connection (extension) to a single or two pair service.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

68M-12-1T - Twelve-Line Sealed Wire Terminal with RJ-21 Tail/Connector

The 68M-12-1T Sealed Wire Terminal is designed for applications requiring an amphenol to twisted pair copper IDC termination.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

90 Series - Bridging Modules

90 Series Bridging Modules provide terminals for connecting additional "home runs" back to the Network Interface Device (NID). The modules are offered with either screw terminations (twelve home runs) or sealed IDC terminations (six home runs).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

About Tii

About Us



Follow Us On:

Facebook   Twitter   YouTube
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon

Join our FREE Email Mailing List

For Email Newsletters you can trust
© 2019 Tii Technologies Inc. All Rights Reserved