tii


 

Network Interface Device - NID


The network interface device (NID) is one of the most critical links in the telecom chain. The technology on the inside, as well as the durability of the box on the outside, must deliver seamless, reliable service to your customer, as well as ensure efficient and cost-effective operation to you.

764S - Indoor Gel Sealed Network Demarcation Device

The 764S Indoor Gel-Sealed Network Demarcation device is ideally suited for VoIP and multi-dwelling unit applications. The Tii 764S is a wall mount unit which may be mounted to a standard, single gang wall box.

AdobePDF.jpg read more (PDF)

356-1I-00 - DSL Compliant Station Protector with Demarcation Jack

The Tii 356-1I-00 Protector Module combines the Tii 356 Heavy Duty Protector with Tii's gel-filled RJ-11 Auto-Jack and gel-filled IDC terminations to provide years of reliable protection against power surges and lightning induced surges.

AdobePDF.jpg read more (PDF)

751 - Indoor Gel Sealed Network Master Jack

The 751 Indoor Gel-Sealed Master Jack is ideally suited for indoor demarcation applications and is a baseboard mount which may be mounted to any suitable flat surface.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

320 NIZ, 325 NIZ, 326 NIZ & 126 NIZ - One-Line Outdoor/Indoor Network Interface Devices

320 NIZ, 325 NIZ, 326 NIZ and 126 NIZ Network Interface Devices improve the capabilities with your network, and with the use of optional encapsulated station protector modules, provides protection against surge damage, premature shorting, corrosion and contamination of circuits.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

758Z Series - Network Interface Adapters

758Z Network Interface Adapters are compact, single pair Retrofit designed to improve network capabilities by converting an existing station protector into a fully functional network interface device. They are designed to replace the existing covers of Tii's 325, 326, 321 or 320 single-pair station protectors.

AdobePDF.jpg read more (PDF)

759 & 760 - One and Two Pair Network Interface Devices

The Tii 759 and 760 Network Interface Devices enable you to take a one- or two-pair station protector and add a subscriber network interface.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Install Notes 759 (PDF)
AdobePDF.jpg Install Notes 760 (PDF)

763 - Six-Line Indoor/Outdoor Network Interface Devices

The 763 is a highly durable, environmentally protected Six-Line Indoor/Outdoor Network Interface unit that features optional built-in electronics to meet a wide range of applications.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

3100 COCOT - (Customer Owned Coin Operated Telephone) Network Interface Device Series

The 3100 COCOT (Customer Owned Coin Operated Telephone) Series Network Interface Devices are rugged indoor/outdoor enclosures, designed as one- or two-pair NIDs for residential/commercial demarcation service.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

3600 - Six-Line Broadband Outdoor Network Interface Devices

The 3600 broadband outdoor Network Interface Device (NID) is a versatile, heavy duty six-pair housing. It accommodates a variety of coaxial and twisted pair drop combinations, while providing superior protection and performance in the harshest outdoor environments.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

3700 - Three-Line Broadband Outdoor Network Interface Devices

The 3700 broadband outdoor Network Interface Device (NID) is a versatile, heavy duty three-pair housing. It accommodates a variety of coaxial and twisted pair drop combinations, while providing superior performance and protection in the harshest outdoor environments.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

3800 - COCOT Mounting Base

The 3800 COCOT (Customer Owned Coin Operated Telephone) Mounting Base provides single-pair Network Interface Device (NID) capability on a rugged plastic base. The 3800 is ideally suited for COCOT and WiFi \"Hot Spot\" applications and is magnetically or screw mountable.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

5100 - Two Line Enhanced Indoor/Outdoor Network Interface Device

The 5100 Two Line Enhanced Indoor/Outdoor Network Interface Device (NID) is a versatile, two pair housing that accommodates a variety of station protection modules, Customer Bridge Modules (CBM) and xDSL splitters. This compact NID provides an additional line module location which increases the versatility of the NID.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

9600 - Twelve-Line Broadband Outdoor Network Interface Devices

The 9600 broadband outdoor Network Interface Device (NID) is a versatile, twelve-pair housing. It accommodates a variety of primary protection and twisted pair drop combinations, while providing superior protection and performance in the harshest outdoor environments.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

8925 - 25 Pair Indoor Network Interface Device

The 8925 Series Network Interface Devices (NIDs) are compact devices specifically designed to be used in place of the "66" type block. 8925 NIDs utilize the same footprint as the standard 66 block. They provide 25 RJ‑11 snap-in type Auto-Jacks for multi-line demarcation testing in one compact unit. The 8925 Series is available with standard screw terminations or Insulation Displacement Contacts (IDCs).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

85 - Sealed Subscriber Bridge with RJ-45 Test Receptacle

The 85 Sealed Subscriber Bridge with RJ-45 (test receptacle) maintains a constant direct connection between customer and central office service provider. The Bridge is equipped with a test jack and gel sealed IDC terminations. The test jack provides an access point for test equipment to assure a signal is being received and transmitted properly.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

91 Series - Expansion Modules

91 Series Expansion Modules are designed to add additional subscriber lines to Tii's pre-wired Outdoor Telephone Network Interface Devices.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

95 Series - Customer Bridge Modules (CBMs)

95 Series Customer Bridge Modules (CBMs) are durable, environmentally protected units designed to be used in the full line of Tii's Network Interface Devices.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

95S - Sealed Customer Bridge Modules (CBM)

The superior performing 95S Customer Bridge Module is a sealed, environmentally protected unit designed to be compatible with the full line of Tii broadband Network Interface Devices, including the 3700, 3600, 5100, 5200, 5300 and 9600 Series.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

95S-2 - Sealed Customer Bridge Modules (CBM)

The Superior performing 95S Customer Bridge Module is a sealed, environmentally protected unit designed to be compatible with the full line of Tii broadband Network Interface Devices, including the 3700, 3600, 5100, 5200, 5300 and the 9600 Series.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

96 Series - Sealed Customer Bridge Module (CBM)

96 Series environmentally sealed Customer Bridge Modules (CBM) have been designed and constructed to take full advantage of the latest gel-sealed technology.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

About Tii

About Us



Follow Us On:

Facebook   Twitter   YouTube
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon

Join our FREE Email Mailing List

For Email Newsletters you can trust
© 2019 Tii Technologies Inc. All Rights Reserved