OSP CONNECTOR BLOCKS FIBER OPTICS 14 888.844.4720 FAT SERIES / INTERFACE DEVICES / SLACK STORAGE UNITS FIBER INTERFACE DEVICES/SLACK STORAGE UNITS Fiber Interface Device/Slack Storage Units are compact units which feature SC connectivity between the OSP fiber drop and customer fiber drop, as well as slack storage. Enclosures are available in a variety of sizes to accommodate up to 12 fiber terminations and installation locations. 169F XX XX ADAPTER TYPE NO. OF PORTS 01 - SC-APC 02 - SC-UPC 01 - 1 02 - 2 DIMENSIONS Dimensions (height x width x depth): 6.11” x 4.33” x 2.15” (15.5 cm x 11.0 cm x 5.5 cm) Up to 4 fibers, indoor or outdoor 171F XX X XX SERIES MIDDLE PLATE FOR POWER CONNECTIONS GROUND STUD 00 = No FP Plate, No Adapters U1 = One SC UPC Adapter on FP Plate U2 = Two SC UPC Adapter on FP Plate A1 = One SC APC Adapter on FP Plate A2 = Two SC APC Adapter on FP Plate 0 = None 1 = Middle Plate 0 = None 1 = Ground Stud DIMENSIONS Dimensions (height x width x depth): 6.67” x 6.56” x 2.87” (16.94 cm x 16.66 cm x 7.29 cm) Terminates Up to Two Single-Fiber Cables (Four with LC) Optional Copper Connectivity Interface for Small Cells, DAS, or G.fast FAT1R1SAN 1 Port Patch Panel SC-APC FAT1R1SCN 1 Port Patch Panel SC-UPC DIMENSIONS Dimensions (height x width x depth): 6.25” x 1.4” x 0.7” (15.9 cm x 3.6 cm x 1.8 cm) FAT - FIBER ACCESS TERMINATION UNIT The FAT Series are indoor/outdoor, single-fiber connection points with small form factors. These units are typically used as Optical Demarcation Points.